5ltrbeater

......and for the record.....after running N20 on most of my old cars.....there is more to running N20 than just hooking up a nozzle to a plate (fuel pump,fuel pressure safety switch,colder plugs,timing adjustment,N20 bottle pressure gauge, bottle warmer,bottle blanket,tranny cooler, shift kit).....i've broken enough cars with N20 to know and help someone else from getting the wrong advice. N20 is a strong and fun toy, but very costly when not used properly.

5ltrbeater

......i don't think that ES300's are that fast, but TC's don't have enough in them to "smoke" and ES. again, just like i told phoenix and i'm telling you, have raced only a handful TC's and was not very impressed (meaning that we were side by side almost the entire race). it's good to know though in the meantime that my car can also take on an IS250 since i'm on par with TC's. who knew? i wouldn't dare race an IS350 though.

Choas

Didn't this tread like die twice lol. Also for the record agian the guy in the TC took stuff out of his car to reduce weight as well.

5ltrbeater

hey i was looking at you sig, what wheels are those on your car? me likey.

Choas

They are IS350 18's. I'm the only one here to ever try them and I don't recommend getting them. It cost me about 1400 to get them set up plus about 3 hours of installing which included shaving about a eighth of an inch off the rear rims and they still rub a lil. Then again if you really want to try them I'll tell you how just ask.

5ltrbeater

nm, sounds like it's too much work already and i'm a lazy guy.

Choas

Go with some is300 17's they look good and fit easy.