Miamiboy87 Car thread
#1
Pit Crew
Thread Starter
Miamiboy87 Car thread
Decided to make a thread with the mods instead of posting different threads all over the place. I like to keep things subtle. Here is the modlist so far:
6500k LED bulbs
3000k LED fog lights
Silver parking bulbs (amber delete)
17x8 Avid1 AV32
Wells Visors
Tanabe NF Springs
Mods to come:
LED interior lights & puddle lights
Silver blinker light (amber delete)
Front bumper license plate mount
25% tint
Subwoofer (I have amp, but need to resarch how to hook it up to stock stereo :\
More pics to come.
6500k LED bulbs
3000k LED fog lights
Silver parking bulbs (amber delete)
17x8 Avid1 AV32
Wells Visors
Tanabe NF Springs
Mods to come:
LED interior lights & puddle lights
Silver blinker light (amber delete)
Front bumper license plate mount
25% tint
Subwoofer (I have amp, but need to resarch how to hook it up to stock stereo :\
More pics to come.
Last edited by Miamiboy87; 11-15-17 at 02:33 PM.
#2
Nice!
A customer ordered a Lexon lip from us for his CT. I'll post pics when he gets it installed.
-Josh
A customer ordered a Lexon lip from us for his CT. I'll post pics when he gets it installed.
-Josh
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
#4
Pit Crew
Thread Starter
Side view of the car lowered.. I actually wanted lower now lol, but I still scrape on some entrances.. I like the Tanabe. I don't think it felt any more different than stock, rides the same, maybe a bit stiffer.
#5
Driver School Candidate
I know that your car is a '14+ and you're running Tanabes (which is only for the '11-'13 models).
Are you running into any problems with your springs?
I am planning on getting the Megan springs which drops the front 1.5 and the rear .9 (which would make it an even drop since the rear is a big higher to start with) real soon. I would be down for the Tanabes, but since there's about a $150 difference between the two and not that big of a difference in drop, I am just going to save and use that money for coils.
Are you running into any problems with your springs?
I am planning on getting the Megan springs which drops the front 1.5 and the rear .9 (which would make it an even drop since the rear is a big higher to start with) real soon. I would be down for the Tanabes, but since there's about a $150 difference between the two and not that big of a difference in drop, I am just going to save and use that money for coils.
#6
Pit Crew
Thread Starter
I know that your car is a '14+ and you're running Tanabes (which is only for the '11-'13 models).
Are you running into any problems with your springs?
I am planning on getting the Megan springs which drops the front 1.5 and the rear .9 (which would make it an even drop since the rear is a big higher to start with) real soon. I would be down for the Tanabes, but since there's about a $150 difference between the two and not that big of a difference in drop, I am just going to save and use that money for coils.
Are you running into any problems with your springs?
I am planning on getting the Megan springs which drops the front 1.5 and the rear .9 (which would make it an even drop since the rear is a big higher to start with) real soon. I would be down for the Tanabes, but since there's about a $150 difference between the two and not that big of a difference in drop, I am just going to save and use that money for coils.
Trending Topics
#10
Pit Crew
Thread Starter
Finally satisfied with Fog lights 2500K . I did have some yellow tint film from Ebay but took them off because I noticed that they started melting for some reason so I just took them off. I let the lights run for a while and touched the glass and it seemed ok, wasn't too hot. Also installed LED to the interior and puddle lights (pics to come)
#12
Pit Crew
Thread Starter
I had the Nokya yellow bulbs melt away part of my fog lights. Ended up purchasing new LED bulbs (white) and the fog light housing
Burnt bulb with housing melted
Pure white LED bulbs replaced the stock halogen
New Winjet fog housing
post installation
Burnt bulb with housing melted
Pure white LED bulbs replaced the stock halogen
New Winjet fog housing
post installation
#13
Driver School Candidate
I had the yellow tint burn my fogs also...ijdmtoy on amazon make fogs for the CT with yellow tinted glass. I used those along with 3k HID's and I love it
- currently sold out but maybe soon
Love the taste you've gone with so far
- currently sold out but maybe soon
Love the taste you've gone with so far
The following users liked this post:
Bagdnum (04-17-18)