Window Deflectors
#17
Intermediate
Thread Starter
Logo comes off its just a sticker. :wink: The logo is very discrete though the pics seem to make it show more than in person.
But , yes they come off.......
No double sided tape....except on the rear visor on the sides about a inch or so long. Just enough to get them to fit tightly on the inside rail so the rear window has clearance. Fronts have no tape at all......they look way better than the pics show because the sun was beating on it.
But , yes they come off.......
No double sided tape....except on the rear visor on the sides about a inch or so long. Just enough to get them to fit tightly on the inside rail so the rear window has clearance. Fronts have no tape at all......they look way better than the pics show because the sun was beating on it.
#20
Tom59: Can we get a close up of that logo? I want to see how it's attached and if it would be easy to remove.
I don't want to put a heat gun to it because it might warp the visors and I don't want to use any chemicals like goo gone because it might discolor it and such...you think it'll be easy to remove?
Also judging by your username, if your real name is Tom, it would be dope if you got the Tom's push button start or at least the Tom's shift ****. That would be Gucci McFly!!!
I don't want to put a heat gun to it because it might warp the visors and I don't want to use any chemicals like goo gone because it might discolor it and such...you think it'll be easy to remove?
Also judging by your username, if your real name is Tom, it would be dope if you got the Tom's push button start or at least the Tom's shift ****. That would be Gucci McFly!!!
#23
Intermediate
Thread Starter
NO HEAT GUN - hair dryer then wd40 if needed , as mentioned. It's a sticker its stuck on ......it honestly isn't very noticable in person. If I get some time later on I can take closeups.
I'm leaving mine on ...but it would be simple to get it off the corner lifts it will come off. -it lifts-
I'm leaving mine on ...but it would be simple to get it off the corner lifts it will come off. -it lifts-
#24
Intermediate
Thread Starter
Couple more show they don't stick way out like some do they they contour down by the mirrors. Extremely nice fit very tight and with windows up impossible to get off if someone decided they wanted them.
#28
Intermediate
Thread Starter
They are -IN CHANNEL- they cannot cover the pillar. I much prefer these as they are really hard to steal and the tape doesn't get affected by winter, summer, rain , sun....I had tape on's yrs ago they literally started coming off after a few yrs.
I'm sure they use better adhesives but I prefer this style. They work really well.
....and are much cheaper than oem japan. 400.00 beans vs 100 or so..weathertech use top shelf plastics uv protected iirc to boot.
I'm sure they use better adhesives but I prefer this style. They work really well.
....and are much cheaper than oem japan. 400.00 beans vs 100 or so..weathertech use top shelf plastics uv protected iirc to boot.
#30
Lead Lap
iTrader: (8)
Join Date: Oct 2010
Location: Texas
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
So... I ordered a dark tinted set from the Weathertech eBay store for the 100 plus shipping. I recieved the long very thin box this morning. Before I say more you should know ive packed and shipped over 1000 items and recieved about the same from other companies.
I open the box and immediately notice 0 packing materials. I see all my reciepts and paperwork as well as the weathertech flyer. The items were packaged as front and rear sets in a plastic sleeve style bag. The bags were not sealed and ends left open. Might I add there is no material protecting the inner bagged pairs from rubbing and banging against each other during the shipping process.
After pulling them out I immediately noticed scratches and marks all over them. I'm going to make a long story shorter and say I've already sent them back. Very poor packing quality from a huge company. I won't risk trying to order them again because of this. I've had the jdm oem ones on Hondas and Lexus so I now know why they are 400.00 and the oems are always packed for perfection.
I open the box and immediately notice 0 packing materials. I see all my reciepts and paperwork as well as the weathertech flyer. The items were packaged as front and rear sets in a plastic sleeve style bag. The bags were not sealed and ends left open. Might I add there is no material protecting the inner bagged pairs from rubbing and banging against each other during the shipping process.
After pulling them out I immediately noticed scratches and marks all over them. I'm going to make a long story shorter and say I've already sent them back. Very poor packing quality from a huge company. I won't risk trying to order them again because of this. I've had the jdm oem ones on Hondas and Lexus so I now know why they are 400.00 and the oems are always packed for perfection.