HELP!!!!!!!!!!! 19" fitment
#1
Rookie
Thread Starter
Join Date: Jun 2006
Location: bc
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
HELP!!!!!!!!!!! 19" fitment
just got a new set of 19" rims online
told by a member in here and got front: 19x8.5+45 225/35/19 rear: 19x9.5+50 245/35/19 setup
but when i put the rear rims on it doens't fit.... the suspension arm a on the way of the inner rims
anyone run with this spec??
right now i put the wider rims (19x9.5) at the front and running the 19x8.5 at the rear it but i am trying to find a way to fit the wider rims at the rear
any recommendation??
told by a member in here and got front: 19x8.5+45 225/35/19 rear: 19x9.5+50 245/35/19 setup
but when i put the rear rims on it doens't fit.... the suspension arm a on the way of the inner rims
anyone run with this spec??
right now i put the wider rims (19x9.5) at the front and running the 19x8.5 at the rear it but i am trying to find a way to fit the wider rims at the rear
any recommendation??
#2
Driver School Candidate
Join Date: Aug 2011
Location: CA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
damn those are wide *** wheels and tire setup for a ct200h lol. What car are you trying to fit these wheel on? If the wheel is hitting the suspension arm then i suggest you run a lower offset. By either adding a spacer or buying another wheel setup with lower offset
#3
Lead Lap
iTrader: (1)
Join Date: Nov 2001
Location: California
Posts: 402
Likes: 0
Received 0 Likes
on
0 Posts
Your cutting it close, looks like those are subaru offsets. Try getting spacers to clear the suspension arm, that offset is fairly high you might get lucky and not have to shave the fenders.
#4
Wow man, that's real aggressive. Who told you that would fit? Those are the exact specs for a staggered setup on a G35 (I used to own one). Too bad it's a different bolt pattern, you could have sold them.
Trending Topics
#8
Rookie
Thread Starter
Join Date: Jun 2006
Location: bc
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
i have a friend can lead me a 5mm space to test it out... hope it work... or worse case i can roll my fender for alitte
any recommended spacer? or doesn't really matter they all work the same??
any recommended spacer? or doesn't really matter they all work the same??