CT 200h Model (2011-2017)

Official "MODDED" CT200h picture thread!

Old 03-05-17, 04:16 PM
  #421  
oldwineguy
Lead Lap
 
oldwineguy's Avatar
 
Join Date: Jun 2002
Location: California
Posts: 425
Received 115 Likes on 59 Posts
Default

Originally Posted by issahybrid
2015 base
Fire Agate Pearl
Bc racing coils
14k fronts // 12k rears
Megan rear camber arms cut and welded to manipulate more degrees of camber
Fenders rolled and pulled to fit my Work Vsxx
Front: 18x9 +15 205/40/18
Rear: 18x10.5 +5 225/40/18
Junction Produce neck cushions
Vip tables being built by me (taking forever)
Curtains being made by me (taking forever)
Very nice, some pretty aggressive wheels there!
Old 03-05-17, 06:31 PM
  #422  
gshadow325
Pit Crew
 
gshadow325's Avatar
 
Join Date: Mar 2006
Location: Georgia
Posts: 210
Received 51 Likes on 40 Posts
Default

Originally Posted by Reesty
Hey flexus1, would you mind sending me or posting the specs of everything electronic you needed for replacing the speakers?
Stock size is 6x9 fronts, 6.5" rears with 2.5" front tweeters

I installed Kenwood XR-1800P in the front. Kenwood XR1800 in the rears

Fronts are 7" component round speakers with a 1 inch tweeter, rears are a 7" coaxial

I suggest NOT doing the heavy stinger road kill. Suggest doing SOme High Quality SoundSkin dampening material. a 11squart ft roll is 6#
I would apply the material on the COMPLETE outer door skin. then COMPLETE inner door skin and then one more layer on the door panel itself.
Then do the floors and hatch area. I have 88sq ft in my car. super quiet.
This brand of material is ultra lightweight, moisture resistant(does not absorb water, if the product does it will get moldy), super easy to work with.
Highly recommend this, i have used everything else on the market. Blackmore, NVX, Hushmat, dynamat, stinger, Focal, xmat, etc. this stuff is so good you'll never want to use anything else.

I'm doing the following setup for audio.
Kenwood DNX 893S headunit
Kenwood XR1800P fronts
Kenwood Xr1800 rears
Kenwood XR900.5 5 channel amp
JL Audio TW1 ten in sub in the floor on left side
Idatalink Maestro RR interface device
Old 03-05-17, 07:46 PM
  #423  
issahybrid
Driver School Candidate
 
issahybrid's Avatar
 
Join Date: Feb 2017
Location: California
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by oldwineguy
Very nice, some pretty aggressive wheels there!
Thank you! Yeah they took a little coaxing to get em in there but it was pretty easy and doable. Also was pleased to see that i only took a 2mpg hit and i'm still getting around 41-42mpg (combined city/hwy)
Old 03-20-17, 11:42 AM
  #424  
Miamiboy87
Pit Crew
 
Miamiboy87's Avatar
 
Join Date: Mar 2017
Location: CA
Posts: 248
Received 16 Likes on 16 Posts
Default

2014 CT200h F-Sport
-I wasn't planning on getting it redline red, I wanted silver or white, but I love this color now. It makes it look more aggressive and draws attention
This is my ct bought about a month ago. Only mods so far are LED headlights (6500k) and fog lights (3000k) (will post soon)
-future mods are window visors/deflectors and that's probably it for the moment.



Last edited by Miamiboy87; 03-20-17 at 11:55 AM.
Old 04-03-17, 02:59 PM
  #425  
Miamiboy87
Pit Crew
 
Miamiboy87's Avatar
 
Join Date: Mar 2017
Location: CA
Posts: 248
Received 16 Likes on 16 Posts
Default LED/Fog upgrade



Fogs before and after (Left are new, right are halogen)
Old 04-05-17, 09:39 AM
  #426  
deeseatea
Driver School Candidate
 
deeseatea's Avatar
 
Join Date: Apr 2017
Location: California
Posts: 4
Likes: 0
Received 1 Like on 1 Post
Default 2016 ct200h f sport

hello everyone just wanted to share my ct. nothing fancy

Exterior:
-16 F sport
-f1r wheels
-bc racing coilovers
-gloss carbon wrapped top of trunk only
-HID headlight/foglights 5k
-window deflector from Wells Visors



Interior:
-vinyl wrapped trim to kelly green (will change it to gloss carbon soon)
-aftermarket gear ****










Last edited by deeseatea; 04-06-17 at 10:54 AM.
The following users liked this post:
Jluciiiano (09-11-19)
Old 04-05-17, 12:27 PM
  #427  
Miamiboy87
Pit Crew
 
Miamiboy87's Avatar
 
Join Date: Mar 2017
Location: CA
Posts: 248
Received 16 Likes on 16 Posts
Default

Nice ride.. what size rims are those? I also thought about getting that shift **** lol. Do you have a DIY on how you did the wrap to the trunk and a link to where you got it at?
Old 04-05-17, 01:30 PM
  #428  
deeseatea
Driver School Candidate
 
deeseatea's Avatar
 
Join Date: Apr 2017
Location: California
Posts: 4
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Miamiboy87
Nice ride.. what size rims are those? I also thought about getting that shift **** lol. Do you have a DIY on how you did the wrap to the trunk and a link to where you got it at?
thanks fam! Rims are 18's x 8.5. Mybad but no diy on the wrapping part. My friend did most of thhe work there and just helped him out with it. Here's the link of the vynil
http://www.metrorestyling.com/SearchResults.asp?searching=Y&sort=7&search=Gloss+carbon&show=32&page=1&cat=354457
Old 04-05-17, 05:16 PM
  #429  
Miamiboy87
Pit Crew
 
Miamiboy87's Avatar
 
Join Date: Mar 2017
Location: CA
Posts: 248
Received 16 Likes on 16 Posts
Default

Thanks, how much vinyl did you use btw? Where in cali are you at? I'm in Oceanside.
Old 04-05-17, 06:29 PM
  #430  
deeseatea
Driver School Candidate
 
deeseatea's Avatar
 
Join Date: Apr 2017
Location: California
Posts: 4
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Miamiboy87
Thanks, how much vinyl did you use btw? Where in cali are you at? I'm in Oceanside.
Not sure to be exact how much we used but i'd say we cut off like 45in length x 15in. I'm in bay area east bay
Old 04-06-17, 10:08 AM
  #431  
Miamiboy87
Pit Crew
 
Miamiboy87's Avatar
 
Join Date: Mar 2017
Location: CA
Posts: 248
Received 16 Likes on 16 Posts
Default

Originally Posted by deeseatea
Not sure to be exact how much we used but i'd say we cut off like 45in length x 15in. I'm in bay area east bay
One last thing, where you get those visors? Ive been looking for some sleek looking ones that would look OEM, thanks in advance.
Old 04-06-17, 10:53 AM
  #432  
deeseatea
Driver School Candidate
 
deeseatea's Avatar
 
Join Date: Apr 2017
Location: California
Posts: 4
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Miamiboy87
One last thing, where you get those visors? Ive been looking for some sleek looking ones that would look OEM, thanks in advance.
Completely forgot about the visors lol but yea i got them at
https://www.wellvisors.com/
Old 04-09-17, 07:02 PM
  #433  
Av8or808
Driver School Candidate
 
Av8or808's Avatar
 
Join Date: Jan 2017
Location: Hawaii
Posts: 5
Likes: 0
Received 1 Like on 1 Post
Default

Hi Everyone,

I've been a long time lurker here, and now I thought I should probably show myself. I bought my '15 CT F-Sport two years ago new from the dealer, and during these two years I've done a couple of mods:

Injen Intake
HKS Exhaust
F-Sport Sway bars
BC BR Coilovers
AG M240 18" Wheels (Temporary until my Work VS-XXs come in)
Modellista Front Lip Spoiler & Side Skirts
TRD Rear Bumper Diffuser

I also have the StanceParts Front Air Cup Suspension Kit, but never had the chance to install it yet.

I've also added some little touches like the OEM sun visors, clean box, cup holder plates, and rear cupholders. All OEM.


The following users liked this post:
GetUrWheel (04-10-17)
Old 04-11-17, 01:10 PM
  #434  
squid808
Driver School Candidate
 
squid808's Avatar
 
Join Date: Mar 2017
Location: hawaii
Posts: 34
Received 5 Likes on 3 Posts
Default

@Av8or808 howzit man what island you from? your car looks nice already cant imagine when you get those works on lol. how much did it cost for that rear diffuser?
Old 04-11-17, 01:40 PM
  #435  
Av8or808
Driver School Candidate
 
Av8or808's Avatar
 
Join Date: Jan 2017
Location: Hawaii
Posts: 5
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by squid808
@Av8or808 howzit man what island you from? your car looks nice already cant imagine when you get those works on lol. how much did it cost for that rear diffuser?
Hey howzit I'm on Oahu Kapolei side. Yeah I'm looking forward to the Work wheels. Been waiting over 4 months already, and expecting them mid July.

The TRD rear diffuser was about $730 through Nigel.

Thread Tools
Search this Thread
Quick Reply: Official "MODDED" CT200h picture thread!



All times are GMT -7. The time now is 07:23 AM.