Xtreme LED Pro Sneak Peek
 

Hey there, everybody!

I suppose it's not too early to give you all a little sneak peek at the new Xtreme LED Pro bulbs.

These are Coming Soon - keep an eye on XenonDepot.com, or follow us on , https://twitter.com/XenonDepot, or https://www.instagram.com/XenonDepot/, to keep up to date on all our exciting new products.

http://artoflightindustries.com/xd/i...-led-pro-1.jpg

~Robert

And here are a few more advance pictures to pique your curiosity - a comparison of the frontal portion of our Xtreme LED Bulb with the Xtreme LED Pro bulb, and a shot of the circuit boards:

http://artoflightindustries.com/xd/i...ro-compare.jpg

http://artoflightindustries.com/xd/i...pro-diodes.jpg

~Robert

Any estimates on lumens per bulb?

@Davenlei - Not estimates, only accurate stable lumens numbers :) Stay tuned, as this info will be shared. We just posted an unboxing video on our https://www.instagram.com/xenondepot/https://www.instagram.com/xenondepot/ page -- check it out.

Steve

It's Friday again and we have some more information about our new Xtreme LED PRO Headlight kits for you.

These are available for pre-order now (and currently expected to be shipping during the week of August 28th), and you can find the following fitments:

9005, 9006, 9012, H11, H4, H7, H8, H9, and more to come in the future!

You can see some of the design and technical specs below and you can check out our website for more information.

http://artoflightindustries.com/xd/i...emeled-pro.jpg

~Robert

Thanks for all the support and questions so far about our new Xtreme LED PRO Headlight Kits. There's been a lot of enthusiasm and interest, and we're excited to share this information with you and even more excited to start shipping these out for you during the week of August 28th.

You can pre-order them now, available in 9005, 9006, 9012, H11, H4, H7, H8, H9, H16, and more fitments to come in the future!

Check XenonDepot.com, or follow us on , https://twitter.com/XenonDepot, and https://www.instagram.com/XenonDepot/ for more information as it comes out!

http://artoflightindustries.com/xd/i...lumens-new.png

~Robert

Xtreme LED pro kits are in transit! ETA Friday...

http://artoflightindustries.com/xd/i...-sneakpeek.jpg

We did a lot of Research and Development work to find the best components to build the new LED PRO kits. Here you can see a video where we tested out different materials for the heat sink:


~Robert

Just wanted to share some installtion pictures of the new Xtreme LED Pro Kits on a Toyota 4Runner.

Installed in the low beams:
http://artoflightindustries.com/xd/i...xtledpro4r.JPG

Here, you can see the difference between the HID lights on the left and the LED on the right:
http://artoflightindustries.com/xd/i...vsxtledpro.jpg

Danny

It's great to see installation results coming in from various vehicles with the new Xtreme LED Pro kits installed!

Chrysler 300 - high beams:
http://artoflightindustries.com/xd/i...provsstock.jpg

In this case, they fit in the high beams of a 2013 Dodge Charger:
http://artoflightindustries.com/xd/i...errtledpro.jpg

Danny

And another comparison image! These look great!

http://artoflightindustries.com/xd/i...11ledpro-2.jpg

~Robert

We had some feedback from a customer who installed the new H11 Xtreme LED PRO Kit in a 2017 Lexus CT200h.

Take a look at some of these comparison images below:

OEM Halogen vs Xtreme LED PRO

http://artoflightindustries.com/xd/i...tledpro-vs.jpg

OEM Halogens in Three Different Exposures

http://artoflightindustries.com/xd/i...pro-halexp.jpg

Xtreme LED PRO in Three Different Exposures

http://artoflightindustries.com/xd/i...dpro-ledxp.jpg

Xtreme LED PRO on its Own

http://artoflightindustries.com/xd/i...ledpro-led.jpg

~Robert