Replacement 3 piece wheels parts
08-27-13, 10:54 AM
#1
Rookie
Thread Starter
Join Date: Jul 2013
Location: Florida
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Replacement 3 piece wheels parts
Does your 2 or 3 piece wheel look like this
But you need it to look like this
We Know Wheels SPECIALIZES in replacing the banged up, bent, and cracked sections of many multi piece wheels lines, we do everything from mearly shipping you the new piece to get your whip back on the road looking fresh again, to full on tear downs and restorations on you old banged up beat down wheels. We've seen it and done it all.
LIP TOO SMALL?
WE'VE GOT EM ALL! TAKE THAT 4" LIP TO A 7"
But you need it to look like this
We Know Wheels SPECIALIZES in replacing the banged up, bent, and cracked sections of many multi piece wheels lines, we do everything from mearly shipping you the new piece to get your whip back on the road looking fresh again, to full on tear downs and restorations on you old banged up beat down wheels. We've seen it and done it all.
LIP TOO SMALL?
WE'VE GOT EM ALL! TAKE THAT 4" LIP TO A 7"
08-28-13, 06:33 AM
#3
Rookie
Thread Starter
Join Date: Jul 2013
Location: Florida
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
08-28-13, 10:36 AM
#4
I recently just bought a set of Work VS-XX. All four wheels are the same size but however, the front won't clear my calipers unless I put a 12mm spacer in but that makes the wheel stick too far out. Do you guys sell or make replacement lips that can fit on Work VS-XX? It's a 19 inch wheel with 44 holes for fasteners and 1 for the valve stem. Looking for something between 1.5 to 2.5 inches.
08-29-13, 07:08 PM
#5
Rookie
Thread Starter
Join Date: Jul 2013
Location: Florida
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
I recently just bought a set of Work VS-XX. All four wheels are the same size but however, the front won't clear my calipers unless I put a 12mm spacer in but that makes the wheel stick too far out. Do you guys sell or make replacement lips that can fit on Work VS-XX? It's a 19 inch wheel with 44 holes for fasteners and 1 for the valve stem. Looking for something between 1.5 to 2.5 inches.
Trending Topics
09-18-13, 08:01 PM
#8
Rookie
Thread Starter
Join Date: Jul 2013
Location: Florida
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
02-17-14, 04:06 AM
#13
Driver School Candidate
Join Date: Feb 2014
Location: Ca
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hello I have a staggered set of Iforged daytona 20's..2 of them got outer barrel damage to lip & one has both inner/outer. 1 is a rear with 7" Lip I think the other one is a front with 4" I think. Chrome lips. How much to repair? Bmw94122@gmail.com
Thread
Thread Starter
Forum
Replies
Last Post
92ls400vip
Wheels and Tires Classifieds
19
06-19-11 12:39 PM
ironhorse
LS - 4th Gen (2007-2017)
6
11-16-07 09:04 AM
