PPE GS/LS/SC V8 header group buy
 

We are offering a group buy for our new GS400/430, LS430 headers.

There are two versions for the headers the GS and the LS versions. They are direct bolt up to the factory catalytic converters. Gains seen on our before/after dyno on a stock 01 LS430 were ~20whp/20 ft*lb max gains.

They include necessary hardware and re-use the stock gaskets.

1-5 people = 5% off
6-14 orders = 10% off
15+ orders = 15% off

If you would like to get in on it, we will need a $100 deposit and we can take Visa/MasterCard/Discover (prefered) or Paypal sent to netsales@ppeengineering.com

We will run the group buy for 2 weeks and after that we will build all the headers and have them coated ~ 2-3 weeks. We require the rest of the money after they are done and ready to ship.

The Group buy has been extended 1 week through December 5th.

Any questions? email us at sales@ppeengineering.com or call us at 480-615-7900

GS400 in black:
http://www.ppeengineering.com/siteas...lexus/GSV8.jpg
http://www.ppeengineering.com/siteas...GSv8Driver.jpg

LS/GS430 Headers in Polished:
http://www.ppeengineering.com/siteas...us/LS_SCV8.jpg
http://www.ppeengineering.com/siteas.../LS_SCV8_2.jpg

Group Buy List:
1. Airbender GS430 deposit
2. antran08 GS430 deposit
3. ? GS400 deposit
4. sakataj GS430 deposit
5. gs4_cs GS430 deposit
6. BlaZinG GS430 deposit
7. jlee804 GS430 deposit
8. Nyteryder GS400 deposit
9. GSJAKE GS430 deposit
10. redliner8 SC430 deposit
11. mistah.D GS430 deposit
12. bayareasc400 SC400 deposit
13. ? GS400 deposit
14. GSteg GS400 deposit
15. TLcoats GS400 deposit
16. Lexo951 GS400 deposit
17. BCSC400 SC400 deposit
18. WhiteGS430 GS430 deposit
19. sung35 GS400
20. melvz GS400

Im 99% in. ill have to send money when I get home. How hard is the install on a 430?

will the price be with or without shipping?

Hardest part of header installation is removing the stock manifolds due to the heat shields. This is easier on a 430 than a 400. Do some searching as there are a few posts regarding installation.

This is great! :thumbup:
Can we have them coated in another color (flat black)?
Are you using JET-HOT Coatings?

The pricing is plus shipping. You can email me for a quote. It will be between $20 and $30 for UPS ground in the US.

Yes we are using Jet-hot coatings. They have a black (kind of a semi-gloss) ceramic coating. It is a bit more expensive, it adds $45 to the retail price. The discount would apply to this as well.

great minds think alike....i was wanting my gen 1 S&S headers flat black jet coated but they wanted way to much.

so were talking a total of 4-5 weeks since this will run 2 weeks? possible to re-use OEM heat shield or you make a heat shield to cover them?

PM me a price @ the 10% off (im assuming we'll get atleast 6 people although when its time to put up alot of people seem to shut up :sad:, although i would love to get the 15% off price im sure we'll atleast get the 10%), shipped to 38134 and coated black

I'm in, but i need to makes some money in the next few weeks since i just dropped a few grand on rims and tires today!:eek2: Good to see these finally coming around though!

Any pics of the headers for the GS application?

Would we be able to wrap these or is that a bad idea since they will be coated?

let me know what my cost would be for Long Tube to join the GB. (PM me)

Thanks!

I'd be in with that price if you include IS350=]]

..
 

I'm first in line for these already dropped the deposit.

damn... not really a good time for this to happen,.

im in! depositing now!:thumbup: