Best Hardware and Software to Program Immobilizer
07-16-19, 06:27 PM
#1
Driver School Candidate
Thread Starter
Join Date: Jul 2019
Location: California
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Best Hardware and Software to Program Immobilizer
Friends,
I wanted to virginize the 93C56 immobilizer in my 89661-08070 ECU and so I bought the CH341A mini programmer. I later found out that it was made for Windows XP and I don't know how to get it to work in Windows 10. Also GitHub says that the software is dangerous.
Do anyone know of an eeprom programming software that works well with Windows 10 and how to get the CH341A mini programmer to work safely with Windows 10 or can suggest one that is inexpensive and works well.
I wanted to virginize the 93C56 immobilizer in my 89661-08070 ECU and so I bought the CH341A mini programmer. I later found out that it was made for Windows XP and I don't know how to get it to work in Windows 10. Also GitHub says that the software is dangerous.
Do anyone know of an eeprom programming software that works well with Windows 10 and how to get the CH341A mini programmer to work safely with Windows 10 or can suggest one that is inexpensive and works well.
07-17-19, 08:09 AM
#2
A buddy of mine has used the Top853 programmer with success. I just built a serial programmer and use an old desktop with free PonyProg software.
An XP virtual machine might work.
An XP virtual machine might work.
Last edited by Mauser; 07-17-19 at 08:13 AM.
Thread
Thread Starter
Forum
Replies
Last Post