Twan’s GTE Single Turbo Swap!!
Whats going on guys, been on the forum a few times now and finally decided it’s time to join! First time Lexus owner, but not new to the Toyota family I own a 96 T100 4x4 5 speed. I picked up my 2000 Gs300 not running from a private tow company for $700 bucks. The motor was seized and I thought to myself this is the perfect time to build my first turbo car. So I did some research and I was able to find a local JDM engine shop and picked up my GTE swap for $1800 which included motor/trans and ecu. My original plan was to just refresh the motor with new gaskets/water pump and standard maintenance parts. Well let’s just say I ended up tearing down the entire block and replacing everything!! I will list all mods and prices so far.
https://cimg0.ibsrv.net/gimg/www.clu...6812f4eed.jpeg https://cimg1.ibsrv.net/gimg/www.clu...c7c21ff9c.jpeg https://cimg0.ibsrv.net/gimg/www.clu...92247e073.jpeg https://cimg4.ibsrv.net/gimg/www.clu...b38e66a06.jpeg https://cimg8.ibsrv.net/gimg/www.clu...a8a07f19a.jpeg https://cimg4.ibsrv.net/gimg/www.clu...80a9aee66.jpeg https://cimg5.ibsrv.net/gimg/www.clu...c2e2e4d74.jpeg https://cimg6.ibsrv.net/gimg/www.clu...b74a27fb9.jpeg https://cimg7.ibsrv.net/gimg/www.clu...54c6cc9de.jpeg |
https://cimg0.ibsrv.net/gimg/www.clu...00804608c.jpeg Parts update list: SupraSuperStore pro series T4 manifold Twaked engine harness (ordering in 2 weeks) Supra front calipers StopTech cross/drilled rotors F &R StopTech stainless steel braided lines front and rear Powdercoated all calipers Illusion purple Varrstoen ES9 18x10.5 +22 Full interior swap from another tan GS300 https://cimg4.ibsrv.net/gimg/www.clu...f34855f3c.jpeg |
Nice build. Looks like you've made a lot of progress already
|
Originally Posted by Muffinizer
(Post 10342717)
Nice build. Looks like you've made a lot of progress already
|
Nice build. I suggest you order that Tweaked wiring harness ASAP if you're looking to get this running soon. I just received my Tweaked harness last week for my GS300 build and I ordered it on Aug. 17. Work of art, but it's going to take a minute to receive. No complaints, just want to give you a heads up on a time frame. Good luck on your build! About to start my USDM TT swap. Need to pass emissions in GA, hence all USDM parts.
|
Originally Posted by JasGS350
(Post 10343184)
Nice build. I suggest you order that Tweaked wiring harness ASAP if you're looking to get this running soon. I just received my Tweaked harness last week for my GS300 build and I ordered it on Aug. 17. Work of art, but it's going to take a minute to receive. No complaints, just want to give you a heads up on a time frame. Good luck on your build! About to start my USDM TT swap. Need to pass emissions in GA, hence all USDM parts.
|
Originally Posted by Muffinizer
(Post 10343435)
I don't want to hijack this thread but JasGS350 PLEASE start a build thread and post some detailed pictures and info about your build. I'm really interested in doing the same thing to my car. I wish I was in GA and had gerrb to help me out. That guy is a legend with the 2JZ engines
|
Great Build.. Subscribed
|
Originally Posted by JasGS350
(Post 10343184)
Nice build. I suggest you order that Tweaked wiring harness ASAP if you're looking to get this running soon. I just received my Tweaked harness last week for my GS300 build and I ordered it on Aug. 17. Work of art, but it's going to take a minute to receive. No complaints, just want to give you a heads up on a time frame. Good luck on your build! About to start my USDM TT swap. Need to pass emissions in GA, hence all USDM parts.
|
Originally Posted by tmf2004
(Post 10344162)
Great Build.. Subscribed
|
Update on the build🙌🏾 I placed my order for my engine harness last Thursday , so hopefully I will have it before Christmas. I purchased a intercooler kit, wastegate and bov from a local gs owner. Supra TT brake conversion is done and installed. I’m planning to have the motor dropped in by end of the year. |
I see what is an impressive parts list. However the one critical piece that seems toe be missing is the billet tensioner. I would not risk that build on a $200 part
|
Originally Posted by JasGS350
(Post 10343184)
Nice build. I suggest you order that Tweaked wiring harness ASAP if you're looking to get this running soon. I just received my Tweaked harness last week for my GS300 build and I ordered it on Aug. 17. Work of art, but it's going to take a minute to receive. No complaints, just want to give you a heads up on a time frame. Good luck on your build! About to start my USDM TT swap. Need to pass emissions in GA, hence all USDM parts.
|
Originally Posted by Letsride
(Post 10385050)
I see what is an impressive parts list. However the one critical piece that seems toe be missing is the billet tensioner. I would not risk that build on a $200 part
|
Good deal!
|
All times are GMT -7. The time now is 10:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands