01 GS430 Ground Dweller
#18
Rookie
Thread Starter
And also if there is any one that is close to Atlanta or would want to make a trip here, and would like to swap trunk lids. I have a perfect trunk lid 01 dark blue with the factory wing and custom black chrome emblems. I don't like the wing look. I know a lot of guys love the wing look. So if some one wants to trade blue lids. Message me on here. Thanks.
#19
Rookie
Thread Starter
Well here's a update. For the last couple of weekends I've been working on the trunk. Getting the base set up for the air system. First I welded up the mounts for the air tanks and then had to make the hinge tortion bars stiffer to hold up the extra wieght of the tanks.
The following users liked this post:
firelizard (09-09-18)
#21
Rookie
Thread Starter
And to get the panels booked down I came up with this idea. I made these so after I install the wood flooring on top of the plywood I could tighten the nuts from below and not have the bolt spin.
#24
Rookie
Thread Starter
And the center panel is going to be on a set of basement window hinges. In this picture you can see one hinge is on. I'll get so better pictures when I get the other hinge mounted.
The following users liked this post:
Jerbou71 (09-24-18)
Thread
Thread Starter
Forum
Replies
Last Post