When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Got a chance to upload a video. First start and idle. Exhaust isn't hooked up so it sounds kinda mean. Lol. My brother was the one recording not me.
Noticed some smoke coming from the FPR. Was leaking fuel from the back vacuum port. Think the diaphragm might be no good.
Also, the turbo is blocking the distributor so I can't really set the timing. How much shorter are the 4Runner dizzy caps in width? I need about half an inch of clearance
Have been working on the catch can setup and running all the vacuum lines and setting up the guages. As far as the TT ECU mod goes, I've sortve hit a road block. Trying to see if anyone in the area I might know that has experience with it. Ali's write up seems pretty straight forward but I am the worst when it comes to wiring 😖
Alright so it's been a couple weeks without an update. Got married last weekend so I've been caught up. Lol.
Update:
Catch can installed with braided lines. Had to move the charcoal canister. Would removing it completely throw a code? I was thinking of running it in the trunk like the 98-00 SC's. Don't want my car smelling like gas either
Picked up this drivers side vent pod. Really sweet item. There's a group buy going for these right now.
And also picked this up locally from a buddy. Carbon Fiber TT Spark plug cover.
Looking good homie.. Quick question for your catch can. Looking at the pics how much clearance do you have with the exhaust side hose. It looks like its sitting on the turbo. Also where did you pick up the hose and fittings. I need to install my catch can.
Looking good homie.. Quick question for your catch can. Looking at the pics how much clearance do you have with the exhaust side hose. It looks like its sitting on the turbo. Also where did you pick up the hose and fittings. I need to install my catch can.
The clearance is enough for where the line won't be in contact with the turbo. The fittings I got from a performance shop my buddy goes to but you can order them online anywhere. I should've went with black but didn't feel like waiting. Lol. The exhaust line however seem like it is a tad bit short but I'll see if it's a problem later on
06-29-17, 05:40 AM
