Boosting. 97 SC300 RSP
#46
Lexus Champion
iTrader: (10)
looking good!! now just need to get those vvti coils in so you can have more distributor clearance.. it'll be easy with the FFIM just a little more wiring lol.
Make sure the FPR doesn't leak on you, once the motor is hot it can easily start a fire if it leaks.
You can always run the stock FPR too, its not really a restriction and works fine for boost.
Make sure the FPR doesn't leak on you, once the motor is hot it can easily start a fire if it leaks.
You can always run the stock FPR too, its not really a restriction and works fine for boost.
#49
Instructor
Thread Starter
I got in from a guy named Collin at 2JZ motorsports out in Utah. Came powdercoated along with the filter. You can get oil lines from them but my buddy had some laying around so I didn't bother with those.
They make 2 different kinds, with and without abs so make sure to get for your application. Hope that helps Lex!
They make 2 different kinds, with and without abs so make sure to get for your application. Hope that helps Lex!
#50
Instructor
Thread Starter
looking good!! now just need to get those vvti coils in so you can have more distributor clearance.. it'll be easy with the FFIM just a little more wiring lol.
Make sure the FPR doesn't leak on you, once the motor is hot it can easily start a fire if it leaks.
You can always run the stock FPR too, its not really a restriction and works fine for boost.
Make sure the FPR doesn't leak on you, once the motor is hot it can easily start a fire if it leaks.
You can always run the stock FPR too, its not really a restriction and works fine for boost.
#53
#55
Absolutely gorgeous car ,
two questions though;
two questions though;
- What are your wheel specs?
- And what is the tt ecu mod? I've constantly seen forum posts on Facebook and Club Lexus on how to wiring diagrams but what's the goal exactly with modding the ecu?
#56
Instructor
Thread Starter
The TT ecu mod is NA-T running off a GTE ecu. There's a LONG thread about it on these forums. Just look up TT ECU MOD
#59
Thanks for that last answer SCbounce! Also, is your car on coils? Because I'd really want to have your type of stance;
Mine set up is 19x8 front and 19x8.5 rear on g35 rays, 30 and 33mm offset
Also really hoping it could sit than this without having to relocate a harness.
photo from another member on here,
Mine set up is 19x8 front and 19x8.5 rear on g35 rays, 30 and 33mm offset
Also really hoping it could sit than this without having to relocate a harness.
photo from another member on here,