anant's-CJ6 build using my 94 model LS400
 

Hi friends I'm new to this forum and this is my first post, bought a LS400 94 model with 70k on clock so far. Plan is to build a CJ6 with IFS front and solid rear axial with the 1UZFE and R150 gear box and transfer case. This is just the outline of what I want or just rough work out, I know lot of surprise will pop out along the way but will get what I wanted EOD.https://cimg7.ibsrv.net/gimg/www.clu...0a016ba057.jpghttps://cimg8.ibsrv.net/gimg/www.clu...eded082617.jpg
https://cimg9.ibsrv.net/gimg/www.clu...c6be32d730.jpg
https://cimg0.ibsrv.net/gimg/www.clu...a32574bfdf.jpg
https://cimg1.ibsrv.net/gimg/www.clu...4619bf9874.jpg

As of now removed radiator for a service due to overheating issues, all fluids and filters replaced starts fine no black or white smoke even on high rev so believe engine is good to go, not sure is it the right place to write about my CJ6 build because i couldn't find any special build are those kind of 1UZFE conversion projects so posting it here, request admin to move my thread if needed and not appropriate.

Welcome to the forum. Just so you know, this will most likely be moved to the build thread section which is at the top of the forum.