mjh09e's USB 2.0
The following users liked this post:
specONE (08-18-17)
The following users liked this post:
Sheddy (08-18-17)
The following users liked this post:
mjh09e (08-04-17)
#51
Pole Position
the OP hasn't been around for a few days and i'm installing rs*r coilovers with the same wheel and tire setup as the OP. what is the opinion on how large his wheel gap is? do you think he has eliminated the gap altogether? i'm nervous about coilovers (or any coilover really) because if i need to make an adjustment then i'll have to take apart half of the suspension just to access them, so i'm hoping the shop gets it right or i'm going to have to try to explain as best as i can to make my car look like the OP's. any insight from the community?
#52
Intermediate
the OP hasn't been around for a few days and i'm installing rs*r coilovers with the same wheel and tire setup as the OP. what is the opinion on how large his wheel gap is? do you think he has eliminated the gap altogether? i'm nervous about coilovers (or any coilover really) because if i need to make an adjustment then i'll have to take apart half of the suspension just to access them, so i'm hoping the shop gets it right or i'm going to have to try to explain as best as i can to make my car look like the OP's. any insight from the community?
The following users liked this post:
davyjordi (08-18-17)
#53
Pole Position
Don't want to high jack the OP's built thread, but put it this way.. with the rear height adjusters set at the highest position on those RSRs, it gives the car a 1/4" drop from stock.. so that gives you a good idea of where to start. note that the coils overs will take time to settle, so don't be alarmed that the car sits too high specially during the 1st week.
#57
Driver School Candidate
Can you tell me where those LED's can be ordered? I thought I read somewhere that you can pull from one of the Lexus SUV's. Anyone else find a part number? How about the map lights and dome?