My 1993 Lexus LS400 (australian delivered)
10-18-14, 05:24 PM
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
might also add if ya wana spent the extra you could do away with your original gauges and run a racepack dash which piggy backs off the elite ecu as well
10-22-14, 05:28 PM
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
well update..
ecu purchased. should be here soon.
found a supplier for the patch lead to make it stand alone to control both motor and gearbox..
things are looking good..
10-29-14, 10:08 PM
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
well had a snag...
the ecu plug i need to fix my car i cant get atm..
the one ive got is for other 1uz vehicles
this is the one i got
10-29-14, 10:09 PM
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
i need the pcb plug for this configuration
Attached Thumbnails
10-29-14, 10:10 PM
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
seriously looking at buying a 3D printer now and making my own ecu sockets.
11-03-14, 05:52 PM
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Ok the ecu just arrived..
Looks like I've got a supplier for the ecu plug I need..
Sweet
11-05-14, 02:38 PM
Moderator
Join Date: Sep 2008
Location: 714/949, SoCal
Posts: 7,008
11-05-14, 02:47 PM
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
11-07-14, 12:58 AM
Driver
Join Date: Nov 2012
Location: Namibia
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
I will definitely be following this one. Keep it up.
11-07-14, 03:03 AM
Pole Position
Join Date: Mar 2014
Location: Oregon
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
11-07-14, 11:37 AM
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
12-18-14, 03:19 PM
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Another peice in the puzzle
Ecu plug
12-20-14, 06:33 PM
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
10-05-15, 07:02 PM
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
ok bit of an update.
just got UCF11 headlights as one of my ucf10 coped a stone and ****ed it.
10-05-15, 07:33 PM
Driver
Thread Starter
Join Date: Dec 2012
Location: AUS, nsw
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
ive now got the Wellvisor door visors.. very well made..