The Albatross Build Thread
#61
So the center vents are in pieces and since its a unicorn part I've decided to make my own center vent assembly using some universal circular vents. here's the direction I'm headed.
I'll be using the same allen head bolts I used for the grab handle deletes. Im kind of going for an aircraft/hotrod theme here.
I'll be using the same allen head bolts I used for the grab handle deletes. Im kind of going for an aircraft/hotrod theme here.
#63
I decided to repair my center vents instead of doing a new style. This is the second time I've ever used fiberglass for anything so I thought it would be fun to try.
First i glued the stock bezel back together.
Then I laid fiberglass resin with some material over the top and trimmed the excess to get everything fitted.
A pic I took during the fitting process with many edges needing to be cleaned up.
After cleaning it up I shot some primer for more sanding.
Then I painted it black and glued it to the vent housing.
I'll post a pic of it back in black and in the car tomorrow.
First i glued the stock bezel back together.
Then I laid fiberglass resin with some material over the top and trimmed the excess to get everything fitted.
A pic I took during the fitting process with many edges needing to be cleaned up.
After cleaning it up I shot some primer for more sanding.
Then I painted it black and glued it to the vent housing.
I'll post a pic of it back in black and in the car tomorrow.
#69
I got tired of the gutted precat so dropped some cash on a XERD header from MVP motorsports.
short story: WORTH IT.
https://www.youtube.com/watch?v=QmbR...ature=youtu.be
short story: WORTH IT.
https://www.youtube.com/watch?v=QmbR...ature=youtu.be