|
My 1991 Toyota Soarer UZZ31 - Supercharged....
3 Attachment(s)
Hello,
I have been browsing here for a while but thought It was time to sign up as I start with my new Soarer Project... My Previous Soarer a 1996 UZZ31.. Just sold this car and now starting on the next one... Eaton M112 Supercharger on LP1 Manifold Motec M800 Tinted darkest legal HID lights (high and low beam) JZA80 4 Pot Brakes front and 2 pot back with YellowStuff pads DBA 5000 front and DBA 4000 series rear Slotted Rotors Maltech SS lines Branz LCA (gone with old arms) & RACK bushes NEW JZA80 front lower arms Whiteline sway bars front and rear HR109 18x9 wheels with Nitto Invo 275/35 all round PWR trans cooler Headers (Ceramic Coated) Exhaust 2.5 inch dual custom centre muffler and two Lukey Race mufflers |
5 Attachment(s)
And the new Project:
1991 Toyota Soarer UZZ31 Planned Mods: Motec M800 PCS TCM-2000 Transmission controller - Shame the Tech support from this company sucks! Ford Motorsport TVS2300 Supercharger Running Ford Drive By Wire Throttle Bullet Supercharger intake with custom top plate and modified to take (hopefully) 5 Laminova intercooler cores JZA80 Big Brakes with DBA Rotors and Maltech Lines Whiteline Sway Bars JZA80 Rear subframe and Torsen Diff Factory air suspension - dampers replaced with JZA80 spec Koni's Shift kitted Transmission with heavy duty TCC and high stall |
4 Attachment(s)
More Photos:
|
2 Attachment(s)
more photos:
|
Two drool worthy builds. I'll be following your new one closely. Good to hear some feedback on that auto controller. Before going standalone I want to see my options. From what I know there is the suprastick, spitronics transmission controller, and the PCS unit that you have. Sucks to hear the support sucks I thought the PCS was the best unit out there.
What is your hp goal with this setup? Should be a nice beast :cool: |
nice SC.. i wish these were a direct bolt on for the GS 400...
|
Originally Posted by Clean400
(Post 8165437)
Two drool worthy builds. I'll be following your new one closely. Good to hear some feedback on that auto controller. Before going standalone I want to see my options. From what I know there is the suprastick, spitronics transmission controller, and the PCS unit that you have. Sucks to hear the support sucks I thought the PCS was the best unit out there.
What is your hp goal with this setup? Should be a nice beast :cool: I threw some numbers together... https://docs.google.com/spreadsheet/...Xc&usp=sharing |
Those are some pretty cool builds you've got there. I'd love to have a supercharged Soarer.
|
good ideas, cant wait to see it completed. post some piks of the motor :)
|
looks like a real promising build
|
Always exciting to see a blown SC. Subscribed!
Ryan |
Originally Posted by GreenUZZ31
(Post 8165490)
It probably is the best unit (I have owned a suprastick previously), but staying up till midnight to call the USA and then get stuffed around with no response to emails is just no good, even to buy products off them is PAINFUL!
over 300rwkw would be nice... I threw some numbers together... https://docs.google.com/spreadsheet/...Xc&usp=sharing I'm huge on researching all my car parts before putting them on my car. Sometimes I go to local meets and I can't believe some of the crap people put on their rides. |
Originally Posted by Clean400
(Post 8167500)
I like that chart. Looks like you've been doing a lot of research to choose what supercharger to go with.
|
Your other car was awesome and this one has the potential to be a real beast! Good luck.
Are you going to have any problems getting the supercharger, especially the pulley, to fit under the hood? I am about to install a HTV1900 on my SC400 and that is my concern. I guess it might force me/you to use a smaller pulley. Oh well.:thumbup::) |
Originally Posted by SC400TT
(Post 8166925)
Always exciting to see a blown SC. Subscribed!
Ryan Hey Ryan can you check your PM's please. Thanks |
| All times are GMT -7. The time now is 05:45 PM. |
© 2026 MH Sub I, LLC dba Internet Brands