My RHD conversion
#38
Lead Lap
Thread Starter
Join Date: Jan 2008
Location: Oklahoma
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
yup ive been driving the car here and there with no interior and only one seat. so far i have this weird issue where the whole car would turn off and turn back on, if the car was going fast enough, the car would start running again, if not, the car would turn on but the engine would stay off. i havent really diagnosed it tho... i also dont have any turn signals and i had to make my own switch for now for the headlights and parking lights to turn on so i can drive it at night.
tell me about it. as soon as i saw my car like that, i was looking everywhere in the parking lot that has a dent or something on their bumper but i didnt see any... i was able to pop some of it out but im just going to keep it like that till i finish putting everything together
tell me about it. as soon as i saw my car like that, i was looking everywhere in the parking lot that has a dent or something on their bumper but i didnt see any... i was able to pop some of it out but im just going to keep it like that till i finish putting everything together
#40
Lead Lap
Thread Starter
Join Date: Jan 2008
Location: Oklahoma
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
I haven't really been able to work on the car, but slowly getting my interior in. I'll try to post some pics, hopefully I will be able to get it done before Import Face Off next month. I did use the Soarer sub frame but it is not necessary. They are interchangeable. My USDM was cracked from an accident that's why I used the Soarer one.
Thread
Thread Starter
Forum
Replies
Last Post
lpolo69
Performance & Maintenance
18
02-27-06 04:16 PM