My RHD conversion
#17
hey, ive got a question, for drilling the spot welds, do you use a metal punch in the center of the spotweld to keep the bit centered when drilling. ive always had a problem with my spotweld cutter bit to wander while drilling, but i think a metal bunch would fix the problem
thanks
scott
thanks
scott
#21
ya, the ones i use have a circular cutting part with a metal pin in the middle that would be useful for centering it you hit the spotweld with a punch or something so you had a place to put it in. but ya, i get what your saying
#22
Lead Lap
Thread Starter
Join Date: Jan 2008
Location: Oklahoma
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
#23
Lead Lap
Thread Starter
Join Date: Jan 2008
Location: Oklahoma
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
hey, ive got a question, for drilling the spot welds, do you use a metal punch in the center of the spotweld to keep the bit centered when drilling. ive always had a problem with my spotweld cutter bit to wander while drilling, but i think a metal bunch would fix the problem
thanks
scott
thanks
scott
#26
Lead Lap
Thread Starter
Join Date: Jan 2008
Location: Oklahoma
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
Ah! I feel dumb... lol thanks
#29
Lead Lap
Thread Starter
Join Date: Jan 2008
Location: Oklahoma
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
#30
Lead Lap
Thread Starter
Join Date: Jan 2008
Location: Oklahoma
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
Now time to drill the spot welds out of the firewall that was in the car. It was good that i know how to take it out already since i did it on the firewall that was out but it sucked cause it was still in the car making it have less room to work with