Soleeasii's IS350
 

I recently purchased a 2006 IS350 because I was a fault in destroying my Transfer case in my 2007 IS250 AWD. So when I see all these posts about staggered wheels on AWD, I just cringe!! I will definitely tell you DON'T DO IT!! I ran staggered because after doing research on this forum I thought it was ok... Well the truth be told it was ok for 20k miles before stuff just went south!! Long Story Short I blew my transfer case that was not covered under warranty.. so basically it costs me a couple grand to get that car fixed.

The only main compliant I have is that the IS250 was too slow... I than decided to sell my IS250 and get a IS350!! Am I glad I did that... The extra 100hp makes it a more fun car to drive! Anyways I couldn't wait to finish building my IS.. PICS TO FOLLOW!!

*UPDATED:

PAGE 1 - PARTS, HEADLIGHT INSTALL, Slight MOTOR MODS
PAGE 3 - INTERIOR, STEREO, SUSPENSION
PAGE 7 - REINSTALL OF ARC MAGIC INTAKE AFTER POLISHING
PAGE 8 - NEW WHEELS

Good to know. You should definitely tell the AWD guys! I thought you were going to sell me the ARC intake now. Lol. Good luck putting the new one together. All the parts you have belong on a 350 anyway. Good luck! What color this time?

My collection of parts...

2011 LED Headlights
[http://i1198.photobucket.com/albums/...ps52fdfb54.jpg

JDM DOOR VISORS from NigelJDM and Eyelids from NIA
http://i1198.photobucket.com/albums/...psa29f4a10.jpg

LX-MODE Upper and Lower Grilles
http://i1198.photobucket.com/albums/...ps4e06438f.jpg

Cusco Strut Bar and F-Sport Bars Powdercoated in Transparent Blue
http://i1198.photobucket.com/albums/...psd5d59d9a.jpg

ARC Intake
For those of you that don't know.. this a very Rare Piece for our car... I think only 3 made it to the US, so I feel very fortunate to own this piece. I was unable to find the intake arm so I had Ballistic Motorsport in MA fabricate me an intake arm out of Titanium based off a F-Sport Intake Arm. Very Nice Quality!!
http://i1198.photobucket.com/albums/...1/09f6493c.jpg

Function and Form Type 2 Coilovers
http://i1198.photobucket.com/albums/...ps2bc7915f.jpg

I had to get another WHITE one... It just looks sooo clean!

Holy crap dude I didnt even know ARC made IS parts, talk about rare dude. Looking forward to the build.

ARC Oil Cap with titanium bolt replacements

http://i1198.photobucket.com/albums/...pse8b1b208.jpg

So today was Day 1 of Installations... First up was the 2011 LED Headlights... My car was not equipped with Factory HID so this took longer than expected.... I used the DIY found on this site as well as a wiring diagram I found online to complete this project... IF you do not have Factory HID I suggest getting someone that knows how to wire to help complete this project..

http://i1198.photobucket.com/albums/...ps2b07ae54.jpg

I had a pair of "stripped" 2011 LED Headlights, I also purchased the LED Wiring Harness, Ballast, Flasher Relay, and caps...

http://i1198.photobucket.com/albums/...ps2fe9b203.jpg

Headlight Bracket has to be modified on the 2006-2010 model to accommodate the 2011-2012 headlights. Keep in mind that only 2 of the original 3 screws will go back in to hold this in place.

http://i1198.photobucket.com/albums/...ps6023b225.jpg

So after taking the bumper off and installing the headlight.. I fired it up and the HID lit up perfectly!! Man did I miss having HID's!! But the LED did not work.. Thankfully I had my buddy there to help get the wiring straighten out..

http://i1198.photobucket.com/albums/...ps73a48b20.jpg

Don't ask me. what is what... but this is how the driver side was wired.. we wired it to a relay so that when the low beam wasn't on the LED would shine at 100% brightness and when it was on it would be at 50% brightness.

http://i1198.photobucket.com/albums/...psfff826a2.jpg

We re-used the turn signal bulb (7440A) from the original headlight .. Also this is a 8000k Garax HID bulb.. while i was at it.. I installed some Nokya 9005 Highbeam bulbs and did 3500k HID foglight kit too..

http://i1198.photobucket.com/albums/...psea097378.jpg

So to end the busy night..
the ARC Intake and Carbon Fiber Radiator Shroud went in as well as the LX-Mode Upper and Lower Grilles..

http://i1198.photobucket.com/albums/...ps66bedf3e.jpg
http://i1198.photobucket.com/albums/...ps0dfc095c.jpg

JDM Visors were a fairly easy Install... I used to have AVS visors on my IS250.. I can honestly say that the JDM ones BLOW AWAY the AVS ones.. The quality is so much higher, def worth the investment!!

http://i1198.photobucket.com/albums/...ps9c0f3552.jpg

Good stuff man!!

Good start, always wanted that ARC intake couldnt find it anywhere....

Progress looks great!

What size wheels and tires were you running on your AWD?

Awesome parts. Lets get a shot of the complete engine bay :thumbup:

weak set up.. 19x8.5 / 19x10 235-35-19 / 265-30-19

I got a couple more lil goodies before I do that...