02 LS430 Going Low
#18
Driver School Candidate
Join Date: Jul 2013
Location: HI
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the tip . i should have look at the pictures real well before starting. i taught the rears was in the trunk. however pulling a few tabs and realize it was in the back seat . i got the bc
12 k front and 10 rear . extreme lows. i havent adjusted the ride height yet but still drop it a 1 to 2 inch. satisfied for now. until my rims comes in .
12 k front and 10 rear . extreme lows. i havent adjusted the ride height yet but still drop it a 1 to 2 inch. satisfied for now. until my rims comes in .
#19
Pole Position
Thread Starter
^^ good choice man what kind of wheels you looking to get BTW.
well guys my wheels came in and heres what i got
They were originally 19x8.5 +29 19x9.5 +24. FR face all around
i made 19x9.5 +24 for the front and relip the front (new rear) to 19x10 +9,
http://www.flickr.com/photos/38670456@N03/9309768693/
will be test fitting once i have time...
well guys my wheels came in and heres what i got
They were originally 19x8.5 +29 19x9.5 +24. FR face all around
i made 19x9.5 +24 for the front and relip the front (new rear) to 19x10 +9,
http://www.flickr.com/photos/38670456@N03/9309768693/
will be test fitting once i have time...
#21
Pole Position
Thread Starter
well did some testing but and found out that the fronts wont fit / clear with out spacer so i got a set of spacers to try on
with a 50MM
http://www.flickr.com/photos/38670456@N03/9312552914/
http://www.flickr.com/photos/38670456@N03/9312553532/
http://www.flickr.com/photos/38670456@N03/9309767217/
going to try to get a 38MM spacer and see what happens
with a 50MM
http://www.flickr.com/photos/38670456@N03/9312552914/
http://www.flickr.com/photos/38670456@N03/9312553532/
http://www.flickr.com/photos/38670456@N03/9309767217/
going to try to get a 38MM spacer and see what happens
#22
Pole Position
Thread Starter
well wanted to see the fitment with out the calipers and damn it looks good to bad i cant have it like that.got a lot more to do
http://www.flickr.com/photos/38670456@N03/9312559698/
in other news on stocks
http://www.flickr.com/photos/38670456@N03/9419511702/
http://www.flickr.com/photos/38670456@N03/9312559698/
in other news on stocks
http://www.flickr.com/photos/38670456@N03/9419511702/
#26
Pole Position
Thread Starter
LOL i did thanks
#27
Pole Position
Thread Starter
what i done so far, 1.5 spacer milled 1/8 off and a set of new calipers milled to clear the wheels i forget how much i took off.... so i dont have to really stretch tires and pull so much on the fenders.
http://www.flickr.com/photos/38670456@N03/9573737698/
http://www.flickr.com/photos/38670456@N03/9573742510/
now just more LOW and camber .....
http://www.flickr.com/photos/38670456@N03/9573737698/
http://www.flickr.com/photos/38670456@N03/9573742510/
now just more LOW and camber .....
#28
Pole Position
Thread Starter
got some more work done, rolled fenders and trim to make them fit.....
test fit,
http://www.flickr.com/photos/38670456@N03/9570952079/
http://www.flickr.com/photos/38670456@N03/9570964413/
http://www.flickr.com/photos/38670456@N03/9573751892/
with a little pull
http://www.flickr.com/photos/38670456@N03/9570956769/
test fit,
http://www.flickr.com/photos/38670456@N03/9570952079/
http://www.flickr.com/photos/38670456@N03/9570964413/
http://www.flickr.com/photos/38670456@N03/9573751892/
with a little pull
http://www.flickr.com/photos/38670456@N03/9570956769/
#29
Pole Position
Thread Starter
fitting the fronts...
http://www.flickr.com/photos/38670456@N03/9573809600/
http://www.flickr.com/photos/38670456@N03/9571013409/
will test drive and see what hits and what not..
http://www.flickr.com/photos/38670456@N03/9573809600/
http://www.flickr.com/photos/38670456@N03/9571013409/
will test drive and see what hits and what not..