RotorRian's IS250 Thread
05-22-13, 05:27 PM
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2013
Location: NSW
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
RotorRian's IS250 19x11 Build Thread
Hi All,
I have a Black 08' Aussie spec Lexus IS250.
I got these made for it which are 19x9.5 and 19x11
Did a trial fit the other day and are pushing out from the factory non molested guards about an inch so they wont be too far off the mark with a roll, pull and a bit of camber thrown in.
Any advice from someone running this setup would be appreciated.
I have a Black 08' Aussie spec Lexus IS250.
I got these made for it which are 19x9.5 and 19x11
Did a trial fit the other day and are pushing out from the factory non molested guards about an inch so they wont be too far off the mark with a roll, pull and a bit of camber thrown in.
Any advice from someone running this setup would be appreciated.
Last edited by rotorrian; 05-23-13 at 06:26 PM.
Thread
Thread Starter
Forum
Replies
Last Post