InLyneTrbo

iTrader: (5)

Sorry if this was already asked before, but have you pressure-tested the cooling system yet?

8052JZ

iTrader: (13)

I have not but I don't have any fluid leaks?

InLyneTrbo

iTrader: (5)

You should hook up a pressure gauge onto your radiator with the car running and see if it is actually hitting 15 psi just for kicks. Just trying to brainstorm here and help out if I can

8052JZ

iTrader: (13)

Ill give that a try. Wouldn't hurt I suppose

lexusinred

Good work man

8052JZ

iTrader: (13)

So the under tray is doing amazing work........ Went on a 45min drive with my wife cruising at 65-70mph with an outside temp of about 75-80 with maybe 1 or 2 small pulls. The AEM gauge didn't go any higher the 195*F translating to 185*F on the laptop and staying steady. Its amazing what that does to the cooling system. Nothing was changed but adding the OEM under tray. I will be making an aluminum tray at some point when I have the time to get some materials. But for now, this thing is working fairly well.

Now I just need to get a few video's

PaCowboy

iTrader: (6)

Awesome man!!! I'm surprised that little tray made so much difference!! Now it's time to put the car in kill mode!!

8052JZ

iTrader: (13)

yea its surprised me on all sorts of levels lol

Anyway, here is a boring pic of the engine bay

Ali SC3

iTrader: (10)

I thought it would made a difference, when I removed mine I had similar temp numbers on the aem, but I just left it that way no idea where the undertray is think I threw it away

lilSCsteve

iTrader: (71)

Rich, you're right that engine bay is boring, and that turbo is too small? lol, j/k. and it is amazing what that splash cover does? I just bought a replacement for mine. I bought it cause my current one is hanging and it just looks ef'n tacky to me! lol

8052JZ

iTrader: (13)

haha yea luckily I saved all those under trays and stashed them behind the garage. I might also put the driver/passenger ones back on as well to see if that helps any more.

I need to clean it up a bit and get some good photo's. The car it self isn't in best of condition with dings here an there and scratches on the bumpers etc from previous owner. Thinking about getting paint done first rather than getting a cage put in. BUT safety first right?

PaCowboy

iTrader: (6)

What turbo are you running again?

8052JZ

iTrader: (13)

This is a s471

lexforlife

iTrader: (7)

Engine bay is beautiful... I need to get off my azz and do the vvti cop as I have one of those billet dizzy caps as well since last year

HiPSI

iTrader: (2)

When are you going to run her at the track with the new TH400 setup?