trailer park wife 93 SC300 rebuild
10-31-12, 08:21 AM
#1
Pole Position
Thread Starter
trailer park wife 93 SC300 rebuild
This car is battered,tattered,and rough. Interior is dry rotted leather, and cigarettes burn holes. only good part is the headliner but it is smoke filled
. The outside of the car is in bad shape rust on the rockers, and front fenders are rusted out. The center console, and dash make Nuns slap themselfs and pray for an exorcism. The engine and chassis have 223k so the engine will be getting the most T.L.C. i think i have ever given to a car , girlfriend, and my body
.
So here is the plan bought the car for next to nothing. Needed a rear subframe so I got one as cheap as I could 220 shipped to my work dock high shipping ftw
. seemed decent but, it was better then 600 from the dealer. So in the process of buying the rear subframe I was like time to build that sucker up with some parts since I have it out. so I hit up the good people at Battleversion.com for the rear subframe bushing kit. Let me tell you this rear end is going to be hard then a guy at an old folks home when he looks down the nurses dress. Along with the other things I have instore for this "creature". The car can look ugly as hell if it wants I will be drifting the car most of the time. It will hit k-rails,and spin out, and breaking many times next year! so build the hell out of it in the down season. My return to RWD cars has begun
plans: (so far)
Optima yellow top (in the mail)
Motor swap (1jz) Nocturnal Motorworks / JDMHookup saint peters, MO
Supra tt manual tranny swap Nocturnal Motorworks / JDMHookup saint peters, MO
Hit up a good friend of mine that works as an ARP distributer for all my needs
PBM coils
Gut interior everything gone but the dash
Full cage (next year) Nocturnal Motorworks / JDMHookup saint peters, MO
Aero body kit (next year) Nocturnal Motorworks / JDMHookup saint peters, MO
Custom vinyls from k'netic graphics out of saint peters, MO
Battleversion.com (laundry list of parts)
Supra front hubs (wisefab next year)
Rear over fenders (next year)
LSD (not sure yet been looking) (driftmotion)
Relocate battery to rear of the car
Bigger radiator, with dual electric fans
New rear axles (driftmotion)
New drive shaft (driftmotion)
Rota grids (drift spares)
Pictures to come uploading them tonight please note this isn't for the faint at hart. also if your prone to seizures then look away after 9:00 pm central time the pics will start going up. After I get off work.
Everything can change in a matter of days, and minutes. so stay tuned if you want to watch the **** show begin.
thanks for your time.
. The outside of the car is in bad shape rust on the rockers, and front fenders are rusted out. The center console, and dash make Nuns slap themselfs and pray for an exorcism. The engine and chassis have 223k so the engine will be getting the most T.L.C. i think i have ever given to a car , girlfriend, and my body. So here is the plan bought the car for next to nothing. Needed a rear subframe so I got one as cheap as I could 220 shipped to my work dock high shipping ftw
. seemed decent but, it was better then 600 from the dealer. So in the process of buying the rear subframe I was like time to build that sucker up with some parts since I have it out. so I hit up the good people at Battleversion.com for the rear subframe bushing kit. Let me tell you this rear end is going to be hard then a guy at an old folks home when he looks down the nurses dress. Along with the other things I have instore for this "creature". The car can look ugly as hell if it wants I will be drifting the car most of the time. It will hit k-rails,and spin out, and breaking many times next year! so build the hell out of it in the down season. My return to RWD cars has begunplans: (so far)
Optima yellow top (in the mail)
Motor swap (1jz) Nocturnal Motorworks / JDMHookup saint peters, MO
Supra tt manual tranny swap Nocturnal Motorworks / JDMHookup saint peters, MO
Hit up a good friend of mine that works as an ARP distributer for all my needs
PBM coils
Gut interior everything gone but the dash
Full cage (next year) Nocturnal Motorworks / JDMHookup saint peters, MO
Aero body kit (next year) Nocturnal Motorworks / JDMHookup saint peters, MO
Custom vinyls from k'netic graphics out of saint peters, MO
Battleversion.com (laundry list of parts)
Supra front hubs (wisefab next year)
Rear over fenders (next year)
LSD (not sure yet been looking) (driftmotion)
Relocate battery to rear of the car
Bigger radiator, with dual electric fans
New rear axles (driftmotion)
New drive shaft (driftmotion)
Rota grids (drift spares)
Pictures to come uploading them tonight please note this isn't for the faint at hart. also if your prone to seizures then look away after 9:00 pm central time the pics will start going up. After I get off work.
Everything can change in a matter of days, and minutes. so stay tuned if you want to watch the **** show begin.
thanks for your time.
Last edited by sc400ka; 11-01-12 at 05:54 AM.
10-31-12, 08:36 AM
#2
At first I thought I was reading a description of my recently purchased project car. Haha. Mine is pretty tattered, but mechanically and structurally solid.
+1 on the trailer park wife SCs!
Good luck on the build!
+1 on the trailer park wife SCs!
Good luck on the build!
10-31-12, 11:04 AM
#5
Pole Position
Thread Starter
they will be up later tonight.
for sure i love reading the build threads.
Trending Topics
10-31-12, 01:37 PM
#9
Pole Position
Thread Starter
also all you east coast ppl stay safe i hear the blow job from sandy is messing everyhting up!
pics will be up soon i sware on my left nut!
shayy good to see another STL'er in the crowd!
im sure you will see plenty of the car because it will be sitting at norturnal for a couple of days when i goto put the cage in. however first things first!
get one driftstl.com my name on there is flying squirrel
pics will be up soon i sware on my left nut!
shayy good to see another STL'er in the crowd!
im sure you will see plenty of the car because it will be sitting at norturnal for a couple of days when i goto put the cage in. however first things first!
get one driftstl.com my name on there is flying squirrel
10-31-12, 06:17 PM
#11
Pole Position
Thread Starter
Drum roll please! *loud announcer voice* LADIES AND GENTS! the moment you all be waiting for! the pics! all pics done from my cell phone. so if the quality sucks too damn bad! 
well this is the day i picked it up nice wheels i think!
this is my oxidized to **** front end
my rear. dont stare at my ***! weirdo
passenger side fender has a dent!
see why it's so cheap!
camber you're all doing it wrong!
looks like a pissed off 5 year old chucky got inside the car, and couldn't get out free daughtry CD LEGIT find?!
this was done by buffalo bill got to practice skinning some place!
stock as rock! good thing
open the drunk chucky sized shoes in the rear. I'm like wow this will make me look bad if i get pulled over time to clean this ***** out!
one of the craziest things ever found in a car! who's hungry
rust for days!
only if rust was gold I would be rich as ****
more awesomeness
I'm the jedi knight of rust
well this is the day i picked it up nice wheels i think!
this is my oxidized to **** front end
my rear. dont stare at my ***! weirdo
passenger side fender has a dent!
see why it's so cheap!
camber you're all doing it wrong!
looks like a pissed off 5 year old chucky got inside the car, and couldn't get out free daughtry CD LEGIT find?!
this was done by buffalo bill got to practice skinning some place!
stock as rock! good thing
open the drunk chucky sized shoes in the rear. I'm like wow this will make me look bad if i get pulled over time to clean this ***** out!
one of the craziest things ever found in a car! who's hungry
rust for days!
only if rust was gold I would be rich as ****
more awesomeness
I'm the jedi knight of rust
Last edited by sc400ka; 11-01-12 at 05:58 AM.
10-31-12, 06:18 PM
#12
Pole Position
Thread Starter
holy hell Batman its rust! you diabolical S.O.B!
yet another thing to replace GREAT!
Get it right, Get it tight!
2000 subframe no rust 20,845 on the car! I'm trying to get more parts off this car as we speak!
a few things to rememeber about the build is the car's engine runs good, transmission good, rear diff good, suspension good, and exhaust is good just needs exhaust gaskets.
thanks again!
Last edited by sc400ka; 11-01-12 at 05:58 AM.
10-31-12, 06:23 PM
#13
1JZ Single SC400
iTrader: (59)
Join Date: Jan 2009
Location: Alabama, Roll Tide!
Posts: 8,518
Likes: 0
Received 15 Likes
on
12 Posts
Wow at the rust man. you are going to have your work cut out fo sho. I am watching the progress on this one. good luck on your build thread. check out the classifieds section oftne for some deals on parts.
10-31-12, 06:37 PM
#14
Pole Position
Thread Starter
