When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looks great man!
Love the tuck in the rear. Can the front come down any more or is that max?
It can go more. Just need to play with it a bit
We finished install around 1am last monday then work at 6am so no time and too tired to adjust.
ill take it apart again when i install my suspension arms
sucks those LBJs won't fit your ride. i wonder if you have RCAs, you can make 89-94 LBJs fit. i should have experimented since i have RCAs, but i just ordered OEM LBJs last week. where in socal are you dranom?
I testfitted the 89-94 LBJ since timmy brought it up. I only have a regular RCA not the studio one since I sold it few weeks ago. Depending on how wide the cambering RCA you get the 89-94 ones might fit. It's tight but doable
Yeah, that's not even close... Maybe with a massive RCA or a camber-RCA those could work in a pinch but even then, I'm not a fan of the proximity to the caliper not to mention they are going to be totally out of plane and further out from where the OEM LBJ'S would put the tie rod. You could run into problems with your alignment trying to run those rather than the correct ones, not to mention they completely defeat any addition of RCA's since they raise the tierod position.
For reference, here are my B/A LBJ'S for my 96, similar to the other you posted a pic of:
http://www.flickr.com/photos/zx3tuning/9223511476/http://www.flickr.com/photos/zx3tuning/9223511476/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/9220732427/http://www.flickr.com/photos/zx3tuning/9220732427/ by http://www.flickr.com/people/zx3tuning/, on Flickr
http://www.flickr.com/photos/zx3tuning/9220730963/http://www.flickr.com/photos/zx3tuning/9220730963/ by http://www.flickr.com/people/zx3tuning/, on Flickr
Like i said you need those fat cambering rca to fit. This is just for comparison and i'm not gonna force the raybestos to fit so you guys calm down. Lol
Like i said you need those fat cambering rca to fit. This is just for comparison and i'm not gonna force the raybestos to fit so you guys calm down. Lol
I wished the raybestos made lbj for 98-00 though.
a 20-25mm RCA (straight) should work just fine as well.
Got another set of meisters since my other wheels got delayed in shipping.
repolished outters, inners brushed and the face was powdercoated matte gunmetal grey
Got another set of meisters since my other wheels got delayed in shipping.
repolished outters, inners brushed and the face was powdercoated matte gunmetal grey