3rd Time's the Charm! Crispy SC300.
#31
I don't think the 4th wire is a coil trigger, I think the 4 are: 12v, ground, IGT, and an IGF.
there is some info in this thread, that says what I was suggesting is how a 1zz is wired stock.
another person said it didn't work but they are also trying to sell something so yeah, it might work.
http://www.texassupras.com/viewtopic...=2286&start=20
there is some info in this thread, that says what I was suggesting is how a 1zz is wired stock.
another person said it didn't work but they are also trying to sell something so yeah, it might work.
http://www.texassupras.com/viewtopic...=2286&start=20
All I need is half that and for it to run nice, I'm happy.
#33
I got a sweet deal on all the JDM Aristo ECU conversion parts.
Check em out!
94 Aristo JDM 2JZGTE ECU, Supra Denso TT Fuel pump, 5 Lexus ES300 coil packs, 1 2JZGTE OEM Coil pack for clearance of crossover throttle body, and the JDM Turbo MAP sensor.
All I need are the connectors, make a few subharnesses and I am ready to start the turbo parts shopping!
Check em out!
94 Aristo JDM 2JZGTE ECU, Supra Denso TT Fuel pump, 5 Lexus ES300 coil packs, 1 2JZGTE OEM Coil pack for clearance of crossover throttle body, and the JDM Turbo MAP sensor.
All I need are the connectors, make a few subharnesses and I am ready to start the turbo parts shopping!
#34
gte & na-t
iTrader: (44)
Join Date: Jan 2007
Location: Maryland /Germantown
Posts: 5,139
Likes: 0
Received 7 Likes
on
7 Posts
Nick you may have to get some is coils to clear the stock manifold unless you can modify the manifold , which i have seen done someone.
The coil connector you can get from chrysler sebring v6 , doge intrepid they last longer than the toyota one anyway.
Looks great man keep it up!
I am gonna start another project soon, just like yours.
The coil connector you can get from chrysler sebring v6 , doge intrepid they last longer than the toyota one anyway.
Looks great man keep it up!
I am gonna start another project soon, just like yours.
#35
Nick you may have to get some is coils to clear the stock manifold unless you can modify the manifold , which i have seen done someone.
The coil connector you can get from chrysler sebring v6 , doge intrepid they last longer than the toyota one anyway.
Looks great man keep it up!
I am gonna start another project soon, just like yours.
The coil connector you can get from chrysler sebring v6 , doge intrepid they last longer than the toyota one anyway.
Looks great man keep it up!
I am gonna start another project soon, just like yours.
I'm Going FFIM soon, but wanted to put a kit together that could be installed on the crossover manifold as well. We will see how it goes.
Oh yeah? What kind of whip is it this time?