Project Lex (92 Royal Jade SC300)
.... this is next 
after the VVTi build 
04-14-17, 08:13 AM
#828
Thanks all. The finish is called pro line liquid wrap. Basically a more professional version of plastidip. But doesn't feel as rubbery and is more robust of a finish. I told em I just kinda wanted an oem silver type look. Didn't turn out exactly like I wanted, but close enough I'm good with it.
04-14-17, 10:30 PM
#833
04-24-17, 02:59 PM
#835
Got my 3D Printed gauge / Switch mount installed fully finally. Also got some updates done to the BTI gauge. There's a couple things I want to tweak to the mount and get it re-printed, but it's spring time and screw it it's not too high on my priority list because I want to enjoy the car!
On another note, I've been wanting to do some upgrades / updates to my suspension. The whole curb ordeal just helped me decide to do it sooner rather than later. I spent way too much money last month, but once again screw it, lol. So I just felt the desire to take a picture of what my massive credit card bill for last month looks like, as much as I could all in one picture haha. Not pictured were are the repaired/refinished wheels & new tires. That's a lot of money for stuff that won't add an ounce of horsepower, lol.
-New BC Coilovers
-New Figs rear lower control arms
-New OEM Supra front lower control arms
-New OEM style/replacement Moog front upper control arms
-FID 1600cc High-Z Injectors
-Amsoil fluid for transmission & diff
On another note, I've been wanting to do some upgrades / updates to my suspension. The whole curb ordeal just helped me decide to do it sooner rather than later. I spent way too much money last month, but once again screw it, lol. So I just felt the desire to take a picture of what my massive credit card bill for last month looks like, as much as I could all in one picture haha. Not pictured were are the repaired/refinished wheels & new tires. That's a lot of money for stuff that won't add an ounce of horsepower, lol.
-New BC Coilovers
-New Figs rear lower control arms
-New OEM Supra front lower control arms
-New OEM style/replacement Moog front upper control arms
-FID 1600cc High-Z Injectors
-Amsoil fluid for transmission & diff
The following users liked this post:
megamax (04-24-17)
04-24-17, 07:57 PM
#836
Got my 3D Printed gauge / Switch mount installed fully finally. Also got some updates done to the BTI gauge. There's a couple things I want to tweak to the mount and get it re-printed, but it's spring time and screw it it's not too high on my priority list because I want to enjoy the car!
On another note, I've been wanting to do some upgrades / updates to my suspension. The whole curb ordeal just helped me decide to do it sooner rather than later. I spent way too much money last month, but once again screw it, lol. So I just felt the desire to take a picture of what my massive credit card bill for last month looks like, as much as I could all in one picture haha. Not pictured were are the repaired/refinished wheels & new tires. That's a lot of money for stuff that won't add an ounce of horsepower, lol.
-New BC Coilovers
-New Figs rear lower control arms
-New OEM Supra front lower control arms
-New OEM style/replacement Moog front upper control arms
-FID 1600cc High-Z Injectors
-Amsoil fluid for transmission & diff
On another note, I've been wanting to do some upgrades / updates to my suspension. The whole curb ordeal just helped me decide to do it sooner rather than later. I spent way too much money last month, but once again screw it, lol. So I just felt the desire to take a picture of what my massive credit card bill for last month looks like, as much as I could all in one picture haha. Not pictured were are the repaired/refinished wheels & new tires. That's a lot of money for stuff that won't add an ounce of horsepower, lol.
-New BC Coilovers
-New Figs rear lower control arms
-New OEM Supra front lower control arms
-New OEM style/replacement Moog front upper control arms
-FID 1600cc High-Z Injectors
-Amsoil fluid for transmission & diff
