Guest

omg! you just told me the other day that your buying somthing crazyu...i just figured out what your doing!! lol i put 1 and 2 together and now i think i know what your doing! help me fix my car!

Lexwon

big boom to me equals BOOST

Cleanshots

iTrader: (2)

^^ dude have you read this thread? i already swapped the twin turbo. so its already boosting homie.

P Weezy

iTrader: (1)

b4 i read to the part where it says "..no not with the sc...", i almost fainted cause i thought the SC was involved. But, still sorry to hear that and glad ur coo...hope it works out and keep us informed!

Cleanshots

iTrader: (2)

You manual guys, (w58 or r154) consider doing your shifter bushings. get the following parts

33548-31010 this is the shifter lever bushing ~ this is from a 89 supra
33505-35020 this is the shifter seat bushing ~ this is from a 93 tacoma its green.

the shifter will have ZERO movement the tacoma bushing is thicker but just shove it in. with these bushings and it cost me 15 bucks total!




One inch or so extension, i cut the shifter and made a flat piece. then i TIGed the beast with 4130 chromoly, an i used stainless filler wire. solid feels just like normal just back farther

t70 supra

iTrader: (-4)

WOW time for some new seats looked like my old sc seats

P Weezy

iTrader: (1)

^^oh, im sure that'll be taken care of.

omidg89

iTrader: (2)

how does your shifter feel after being extended?

Cleanshots

iTrader: (2)

same as stock just sits back an inch or so.. it feels no different. the new bushings are sex.

ashtray

iTrader: (12)

for w58 guys..does it matter what year it is?

Cleanshots

iTrader: (2)

as far as i know, NO cause the shifters themselves are all the same for the w58 and the r154. i dont think it does. look at the bottom of the shifter if anything maybe just the tip bushing but seat is the same for sure.

Cleanshots

iTrader: (2)

frekkin damn it, my flywheel bolts have come off, or broke off. damage control tomorrow should be done tomorrow or Saturday, because there is an event Sunday.

IonFeright

iTrader: (-1)

So thats what happened... Get that ****er fixed! <333

Cleanshots

iTrader: (2)

ok so took my R154 back off the flywheel was wiggling and i broke the flywheel bolt, extracted the broken piece and called it a day. still gotta inspect the crank and make sure it can still be used if not, there was metal transfer between the flywheel and the crank; if its messed up the engine will be rebuilt (will not be close to stock)... lets hope i dont have to rebuild cause im broke. no drift event for me tomorrow.

camberSC

iTrader: (17)

I'm guessing your big explosion was a dud..... it's ok lil' homie. Hope you get your tranny and truck fixed.