|
oh man can't wait to see it when it's finished...
|
Wow looking forward to this! Looks like it'll be a lot of fun haha! Wish I had the time and money to do something like this... haha. Can't wait to see it finished!
|
Originally Posted by ScottURnot
(Post 3998132)
I think thats a good guess, thats right down the middle of where I would like it to land but who really knows?
A intercooled 4.7 liter on 20lbs boost, in theory it should hit that. But can you imagine the torque this engine should put out?:D |
After seeing the pictures of Mark's (Blizzy) new headers I had to get a set. I was already questioning the S&S shorty headers for my build. My cams have a powerband from 3500-7500rpm plus the fact its a 4.7 Liter all makes me feel like a larger diameter longer tube header is required. The Rush headers are 1.75" stainless tube plus they are extremly long, the craftsmanship looks super. I contacted Neil and ordered them. Will update with pics when I get them. I'm am excited!
|
Originally Posted by ScottURnot
(Post 4040207)
After seeing the pictures of Mark's (Blizzy) new headers I had to get a set. I was already questioning the S&S shorty headers for my build. My cams have a powerband from 3500-7500rpm plus the fact its a 4.7 Liter all makes me feel like a larger diameter longer tube header is required. The Rush headers are 1.75" stainless tube plus they are extremly long, the craftsmanship looks super. I contacted Neil and ordered them. Will update with pics when I get them. I'm am excited!
|
damn we're definatly gonna have to have a midwest SC meet sometime when this is all done scott..
|
6 Attachment(s)
Some toys are starting to show up.
BTW, I also added some pictures to the first post of the engine internals. Custom ground Kelford Cams and spings! Attachment 455489 Attachment 455490 AEM modified for the 1UZFE! Attachment 455491 Front mount Water cooler! Perfect fit for the hole in my JIC front! Attachment 455492 Attachment 455493 85mm Throttle Body Attachment 455494 I also Have a brand new Whipple in my Kitchen! No pics yet. |
It's gonna be sick once it's completed! Subscribed to this thread :D
|
Scott,
When you assemble the supercharger and the water-air intercooler together, can you post some pics of how the setup looks like? I just want to learn how the intercooler can work for the root supercharger setup. 2 months...T minus and counting on your project...LOL. |
Oh no! U went with the AEM EMS! Plug and play my arse! Welcome to my nightmare! :D
U got anyone to tune it for you? Let me know if U find a really good guy. I went to Ray at fusion works here in town (Suppose to be the AEM supra guru) and he had "issues" with my setup and pretty much gave it back to me in worse shape than I gave it to him. So I started over myself and read that huge manual like 8 times! I've got my tune about 95% done now. It drives nice and boosts well. But It's not quite as perfect as the factory ECM was. I'd like to get it there! If U need any help getting it up and running, just gimmie a call! :thumbup: Pretty confident I could get it setup at least well enough to get to a dyno... Got an ETA on completion a date? |
Originally Posted by forcefed86
(Post 4059109)
Oh no! U went with the AEM EMS! Plug and play my arse! Welcome to my nightmare! :D
U got anyone to tune it for you? Let me know if U find a really good guy. I went to Ray at fusion works here in town (Suppose to be the AEM supra guru) and he had "issues" with my setup and pretty much gave it back to me in worse shape than I gave it to him. So I started over myself and read that huge manual like 8 times! I've got my tune about 95% done now. It drives nice and boosts well. But It's not quite as perfect as the factory ECM was. I'd like to get it there! If U need any help getting it up and running, just gimmie a call! :thumbup: Pretty confident I could get it setup at least well enough to get to a dyno... Got an ETA on completion a date? Well I hope to have good luck with it. I am going to fly Mitch Pederson in to tune it. He is a AEM expert, infact he used to work for them. He actually opened this unit up and modified it for my V8 and set it up for my COP's. He also loaded it with some maps from another boosted 1UZ that he tuned recently. He provied me with a ton of info regarding hookup/install. I hope it goes smoothly but who knows. Perhaps I should put you in touch with him? I am hoping to get this car ready for tune in late january but it could be delayed, we will see. |
Man nice setup and looks like it is thought through. Always nice to see CLEAN, THOUGHT OUT projects - which all of yours are. Man you change setups like they are boxers lol
Creating a new path for people to follow, or dream to follow :) Good Luck. |
Originally Posted by ScottURnot
(Post 4059114)
Well I hope to have good luck with it. I am going to fly Mitch Pederson in to tune it. He is a AEM expert, infact he used to work for them. He actually opened this unit up and modified it for my V8 and set it up for my COP's. He also loaded it with some maps from another boosted 1UZ that he tuned recently. He provied me with a ton of info regarding hookup/install. I hope it goes smoothly but who knows. Perhaps I should put you in touch with him?
I am hoping to get this car ready for tune in late january but it could be delayed, we will see. I am def keeping on top of this thread. Seeing as I will pretty much have your old setup (part for part really) I HAVE to see what the 4.7 brings to the streets. Keep it up Scott! |
8 Attachment(s)
New headers from Rush imports arrived! Wow that was fast!
These headers are beautiful! Stainless construction! Tig welds! 1 3/4" primarys dump into 2" then 2" dump into 2.5". They are sweet! Neil Griffiths really pulled thru on these. Once I fit them I will share more but for now I am extremly pleased. Pics! Attachment 455495 Attachment 455496 Attachment 455497 Attachment 455498 Attachment 455499 Attachment 455500 Attachment 455501 Attachment 455502 |
wow. nice. 4-2-1 design is so much nicer for torque then a 4-1.
hey scott what are the specs on the valve springs and cams. im curious how much seat and full lift kelford uses on their stuff. do they actually make their own springs or do they design and outsource to a big manufacturer like ferrea? |
| All times are GMT -7. The time now is 05:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands