OH Rotrex Supercharger Starter Kit (The last original Rotrex kit EVER)
11-18-14, 07:06 PM
#1
Rotrex Supercharger Starter Kit (The last original Rotrex kit EVER)
I am going to be selling ONE SET of all of the custom parts to build a Rotrex s/c kit.
This setup put down 358whp @ 7.5psi on my IS350, with a safe AFR of 12.3
What the kit includes: All custom machined BY HAND.
1x Custom machined 5.25" 8-rib crank pulley
1x Intake pipe w/ MAF flange
1x BOV pipe with BOV flange (synapse)
1x Rotrex Bracket
3x bracket spacers
1x tensioner pulley w/ custom spacer
1x idler pulley w/ custom spacer
3x engine block studs and nuts
2x pulley mounting bolts and nuts.
1x FULL INSTALLATION INSTRUCTIONS AND PARTS LIST for the remaining items you will need.
In order to complete the kit, you will need:
Intercooler (27x6x3.5)
synapse BOV
Couplers/Clamps
Hot side piping
Oil catch can
supercharger belt
Air filter
misc hardware
boost gauge
water/meth setup (optional)
And a Rotrex c38-71 Supercharger
- comes with 3yr warranty and oiling system
Price: $2800
This is the last kit that will ever be made by Justin Walls, the man who pioneered the machining of the Rotrex swapped LMS supercharger kit.
If you want me to gather all of the parts for you (minus the supercharger) and ship them all in the same box, add $1500.
EDIT: ANOTHER OPTION - starter kit w/o any piping.
1x Custom machined 5.25" 8-rib crank pulley
1x Rotrex Bracket
3x bracket spacers
1x tensioner pulley w/ custom spacer
1x idler pulley w/ custom spacer
3x engine block studs and nuts
2x pulley mounting bolts and nuts.
1x FULL INSTALLATION INSTRUCTIONS AND PARTS LIST for the remaining items you will need.
PRICE: $2000
This setup put down 358whp @ 7.5psi on my IS350, with a safe AFR of 12.3
What the kit includes: All custom machined BY HAND.
1x Custom machined 5.25" 8-rib crank pulley
1x Intake pipe w/ MAF flange
1x BOV pipe with BOV flange (synapse)
1x Rotrex Bracket
3x bracket spacers
1x tensioner pulley w/ custom spacer
1x idler pulley w/ custom spacer
3x engine block studs and nuts
2x pulley mounting bolts and nuts.
1x FULL INSTALLATION INSTRUCTIONS AND PARTS LIST for the remaining items you will need.
In order to complete the kit, you will need:
Intercooler (27x6x3.5)
synapse BOV
Couplers/Clamps
Hot side piping
Oil catch can
supercharger belt
Air filter
misc hardware
boost gauge
water/meth setup (optional)
And a Rotrex c38-71 Supercharger
- comes with 3yr warranty and oiling system
Price: $2800
This is the last kit that will ever be made by Justin Walls, the man who pioneered the machining of the Rotrex swapped LMS supercharger kit.
If you want me to gather all of the parts for you (minus the supercharger) and ship them all in the same box, add $1500.
EDIT: ANOTHER OPTION - starter kit w/o any piping.
1x Custom machined 5.25" 8-rib crank pulley
1x Rotrex Bracket
3x bracket spacers
1x tensioner pulley w/ custom spacer
1x idler pulley w/ custom spacer
3x engine block studs and nuts
2x pulley mounting bolts and nuts.
1x FULL INSTALLATION INSTRUCTIONS AND PARTS LIST for the remaining items you will need.
PRICE: $2000
Last edited by stewb10; 02-05-15 at 12:56 PM.
.
Trending Topics
02-05-15, 12:53 PM
#10
No way man!
Another option for you guys:
1x Custom machined 5.25" 8-rib crank pulley
1x Custom machined Rotrex Bracket
3x Custom machined bracket spacers
1x Tensioner pulley w/ custom spacer
1x Idler pulley w/ custom spacer
3x engine block studs and nuts
2x pulley mounting bolts and nuts.
PRICE: $2000
Another option for you guys:
1x Custom machined 5.25" 8-rib crank pulley
1x Custom machined Rotrex Bracket
3x Custom machined bracket spacers
1x Tensioner pulley w/ custom spacer
1x Idler pulley w/ custom spacer
3x engine block studs and nuts
2x pulley mounting bolts and nuts.
PRICE: $2000
Thread
Thread Starter
Forum
Replies
Last Post
GILLEXUS
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
43
11-24-20 12:08 PM
International Fs lexus is250/is350 custom supercharger kit
ozzy250
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
2
06-14-13 09:44 AM