CA (SoCal) M2 Exhaust With Modified Hangers(That need work to fit your car)
12-20-12, 09:44 PM
#1
(SoCal) M2 Exhaust With Modified Hangers(That need work to fit your car)
I am located in Alhambra, 91801.
I have had the M2 Exhaust, and yes, it definitely does sound nice with a stock midpipe. I wanted something louder, so I decided to get the F sport, and jumped on the Invidia Midpipe when I could, and it is DAM loud.
Well anyways, this M2 Exhaust had HORRIBLE fitment. Besides, it was sitting TOO deep inside my car, that it totally burned up my JP rear lip. I decided to take it to a muffler shop that my friend recommended to get it fixed, and what he had to do was cut and weld an extension to my midpipe, and then cut the hangers and weld it in position.
HORRIBLE HORRIBLE muffler shop. They didn't bother welding the edges round and I didnt know until a good CL member, Dave, came to help me install the F sport exhaust, and good thing he did not cut himself open or it would've been bad.
Well anyhow, the midpipe was cut near the tip, to have around an inch or more extra in extension welded on, and the hangers of the M2 exhaust will need to be re-done to fit your car.
The exhaust is EXTREMELY dirty.
Here are some pictures.
I currently do not have any pictures of the midpipe, but it isn't important.
I am looking for $50 to get this outta here! I'm just tryna break even for the stock midpipe I had to buy to do my swap.
Pm me for a number or email
Thanks.
I have had the M2 Exhaust, and yes, it definitely does sound nice with a stock midpipe. I wanted something louder, so I decided to get the F sport, and jumped on the Invidia Midpipe when I could, and it is DAM loud.
Well anyways, this M2 Exhaust had HORRIBLE fitment. Besides, it was sitting TOO deep inside my car, that it totally burned up my JP rear lip. I decided to take it to a muffler shop that my friend recommended to get it fixed, and what he had to do was cut and weld an extension to my midpipe, and then cut the hangers and weld it in position.
HORRIBLE HORRIBLE muffler shop. They didn't bother welding the edges round and I didnt know until a good CL member, Dave, came to help me install the F sport exhaust, and good thing he did not cut himself open or it would've been bad.
Well anyhow, the midpipe was cut near the tip, to have around an inch or more extra in extension welded on, and the hangers of the M2 exhaust will need to be re-done to fit your car.
The exhaust is EXTREMELY dirty.
Here are some pictures.
I currently do not have any pictures of the midpipe, but it isn't important.
I am looking for $50 to get this outta here! I'm just tryna break even for the stock midpipe I had to buy to do my swap.
Pm me for a number or email
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
PlacidBoi
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
7
03-26-13 07:18 PM
