TX OEM IS350 Exhaust with welded Magnaflow 35177 Tips

 
Thread Tools
 
Search this Thread
 
Old 07-10-12, 12:33 PM
  #1  
ssis300
Pole Position
Thread Starter
iTrader: (2)
 
ssis300's Avatar
 
Join Date: Jan 2007
Location: TX
Posts: 294
Received 7 Likes on 4 Posts
Default OEM IS350 Exhaust with welded Magnaflow 35177 Tips -- REDUCED

Unfortunately, this will have to be a local sale, as it is heavy and bulky!!

****Price reduced AGAIN!!****

Looking to sell this OEM setup. I had the tips (4" outlet, slanted/rolled) professionally welded on and they look great. Still, I am going with a different axle-back setup so this one will look great on someone else's ISx50, if you want to maintain the stock sound. The tips cost me $60 each and the welding cost over $100. Letting it go for $50. Pics are below. Thanks!

Here's another forum member who went with the same setup:
https://www.clublexus.com/forums/per...installed.html


Last edited by ssis300; 07-31-12 at 10:37 AM.
ssis300 is offline  
Old 07-10-12, 04:56 PM
  #2  
ohiois350
Pole Position
iTrader: (13)
 
ohiois350's Avatar
 
Join Date: Nov 2008
Location: Ohio
Posts: 2,377
Received 54 Likes on 42 Posts
Default

how much would it shipped to 43219?
any rust on the pipe?
ohiois350 is offline  
Old 07-11-12, 07:49 AM
  #3  
ssis300
Pole Position
Thread Starter
iTrader: (2)
 
ssis300's Avatar
 
Join Date: Jan 2007
Location: TX
Posts: 294
Received 7 Likes on 4 Posts
Default

Originally Posted by ohiois350
how much would it shipped to 43219?
any rust on the pipe?
No rust on the pipe, but I have no ideas on shipping. isn't the system one big piece? Not sure how much weight to calculate. Hopefully someone who has shipped an OEM exhaust can chime in.
ssis300 is offline  
Old 07-11-12, 09:44 PM
  #4  
USB_F
Pole Position
iTrader: (11)
 
USB_F's Avatar
 
Join Date: Sep 2008
Location: Austin, TX
Posts: 274
Received 6 Likes on 6 Posts
Default

The OEM axel back is pretty bulky as a one piece and is pretty heavy.
USB_F is offline  
Old 07-16-12, 08:07 AM
  #5  
ssis300
Pole Position
Thread Starter
iTrader: (2)
 
ssis300's Avatar
 
Join Date: Jan 2007
Location: TX
Posts: 294
Received 7 Likes on 4 Posts
Default

Bump! Reduced.

Last edited by ssis300; 07-19-12 at 09:48 AM.
ssis300 is offline  
Old 07-19-12, 09:47 AM
  #6  
ssis300
Pole Position
Thread Starter
iTrader: (2)
 
ssis300's Avatar
 
Join Date: Jan 2007
Location: TX
Posts: 294
Received 7 Likes on 4 Posts
Default

Reduced again!

Last edited by ssis300; 07-23-12 at 08:15 AM.
ssis300 is offline  
Old 07-19-12, 10:23 AM
  #7  
ohiois350
Pole Position
iTrader: (13)
 
ohiois350's Avatar
 
Join Date: Nov 2008
Location: Ohio
Posts: 2,377
Received 54 Likes on 42 Posts
Default

i hope that you could ship it to Ohio? , but I think the shipping cost would be more than the exhaust? if you could find out the shipping cost i might take it from you
ohiois350 is offline  
Old 07-19-12, 12:48 PM
  #8  
ssis300
Pole Position
Thread Starter
iTrader: (2)
 
ssis300's Avatar
 
Join Date: Jan 2007
Location: TX
Posts: 294
Received 7 Likes on 4 Posts
Default

Originally Posted by ohiois350
i hope that you could ship it to Ohio? , but I think the shipping cost would be more than the exhaust? if you could find out the shipping cost i might take it from you
While I bet this would look even better with the GFX setup, I can't imagine shipping the entire one-piece to you safely. I'm sure it'd be super-awkward to package and (not to mention expensive) to ship. I'm not sure where to begin. Maybe it would fit in an old flatscreen TV box? However, I'm not sure about the protection that it would get if shipped in one of those.

Anyone know how much the OEM system weighs?
ssis300 is offline  
Old 07-20-12, 03:35 AM
  #9  
maddave
Driver
 
maddave's Avatar
 
Join Date: Sep 2006
Location: Texas
Posts: 86
Received 26 Likes on 9 Posts
Default

what city are u in..
maddave is offline  
Old 07-20-12, 08:42 AM
  #10  
ssis300
Pole Position
Thread Starter
iTrader: (2)
 
ssis300's Avatar
 
Join Date: Jan 2007
Location: TX
Posts: 294
Received 7 Likes on 4 Posts
Default

Originally Posted by maddave
what city are u in..
I'm in Austin, but I make a Houston trip fairly often (since the in-laws are there). I'm also up in the DFW area every now and then. I'm always open to meeting halfway (reasonable distances, that is ).
ssis300 is offline  
Old 07-20-12, 09:01 AM
  #11  
ssis300
Pole Position
Thread Starter
iTrader: (2)
 
ssis300's Avatar
 
Join Date: Jan 2007
Location: TX
Posts: 294
Received 7 Likes on 4 Posts
Default

Originally Posted by maddave
what city are u in..
My intel shows that you're in SA. I could always meet you somewhere in between. I actually played golf in New Braunfels on Wednesday, but we couldn't have fit the exhaust in the car, as we took my brother's SL. Hell, I am still amazed that we can get two sets of golf clubs in that thing!
ssis300 is offline  
Old 07-23-12, 08:14 AM
  #12  
ssis300
Pole Position
Thread Starter
iTrader: (2)
 
ssis300's Avatar
 
Join Date: Jan 2007
Location: TX
Posts: 294
Received 7 Likes on 4 Posts
Default

Price reduced again.....$70. The wifey is getting mad that this is taking up space in the garage!!
ssis300 is offline  
Old 07-31-12, 10:36 AM
  #13  
ssis300
Pole Position
Thread Starter
iTrader: (2)
 
ssis300's Avatar
 
Join Date: Jan 2007
Location: TX
Posts: 294
Received 7 Likes on 4 Posts
Default

Bump. Another reduction...... $50.
ssis300 is offline  
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BJM2014
IS F (2008-2014)
10
06-24-16 06:45 PM
Kvs_350
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
0
07-17-15 12:28 PM
ndk83
Performance
1
10-01-07 12:24 PM
jasonviper
IS - 2nd Gen (2006-2013)
17
07-22-07 07:01 PM



Quick Reply: TX OEM IS350 Exhaust with welded Magnaflow 35177 Tips



All times are GMT -7. The time now is 12:42 PM.