CO WTB IS OEM Spoiler install template
#1
Lead Lap
Thread Starter
iTrader: (10)
Join Date: Apr 2010
Location: TX
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
WTB IS OEM Spoiler install template
This is a use once thing...if you have this lying around, I am looking to buy it used. Thinking of installing my spoiler with the drill method...
PM Me.
Thanks
PM Me.
Thanks
#3
Lexus Champion
iTrader: (28)
Barely anyone uses the drill method, too much work involved for too little "reward", and honestly unless you live in a city full of thieving lexus modders, I doubt anyone will run up to your car and pull off your OEM wing.
So lets suppose you do live in this nightmare town, double sided tape will not be easy to remove without possible damage to the spoiler.
So lets suppose you do live in this nightmare town, double sided tape will not be easy to remove without possible damage to the spoiler.
#4
Driver School Candidate
Not sure how you would be able to just "stick" the OEM lip spoiler on without drilling....the spoiler has 3 threaded studs sticking out, it's not like you can just use a pair of pliers to remove them.
I have the template and installed my lip spoiler using the drilled method.
I'll see if i can scan and ship you a copy of it. There's a copy/print room at my office, i'll check with the broads there.
If not, i can just sell you the one i have. $25 + shipping to the US? I paid $65 USD brand new from Lindsay Lexus along with shipping to Canada.
I have the template and installed my lip spoiler using the drilled method.
I'll see if i can scan and ship you a copy of it. There's a copy/print room at my office, i'll check with the broads there.
If not, i can just sell you the one i have. $25 + shipping to the US? I paid $65 USD brand new from Lindsay Lexus along with shipping to Canada.
#5
Lead Lap
Thread Starter
iTrader: (10)
Join Date: Apr 2010
Location: TX
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
I appreciate the offer, but I did end up just using the 3M tape, along with some 3M adhesive promoter to ensure best bonding.
I used a dremel to remove the studs and to file down the metal ends to be smooth with the spoiler. Only took about 10 minutes to remove all 3 of them.
I used a dremel to remove the studs and to file down the metal ends to be smooth with the spoiler. Only took about 10 minutes to remove all 3 of them.
Thread
Thread Starter
Forum
Replies
Last Post
WIZARD1325
IS - 2nd Gen (2006-2013)
19
10-06-11 08:21 PM
IS25Heaven
CL of Southern California
13
10-02-09 12:31 AM