NC Figs caster arm bushings
#5
Who ever is interested in these caster arm bushings please note, unless he purchased two sets of these, they do not come with 60 and 65mm sized bushings. You either purchase a 60mm from Mike if your car is early '98-00, or 65mm '01 and up. Don't base what size you will need solemnly on the year either, I had a GS that was a '99 but was made in January of 2000, and infact came with 65mm bushings not the 60's. They are $155 on shopfigs.com
I believe the seller may be confused due to the fact that these bushings are not one piece, but consider each side 3 pieces, or actually 4, one center peice that gets pressed in the caster arm, and two end caps which are a smaller diam. Poly cap, and the 4th part just being the core that slips in through the center all three peices where you would be slipping the mounting bolt through to hold everything together.
Seller, measure the OD of the two peices you have that are invaded in the metal, it'll be either 60, OR 65mm. That's what buyers must know. Good luck.
I believe the seller may be confused due to the fact that these bushings are not one piece, but consider each side 3 pieces, or actually 4, one center peice that gets pressed in the caster arm, and two end caps which are a smaller diam. Poly cap, and the 4th part just being the core that slips in through the center all three peices where you would be slipping the mounting bolt through to hold everything together.
Seller, measure the OD of the two peices you have that are invaded in the metal, it'll be either 60, OR 65mm. That's what buyers must know. Good luck.
#6
This is what it should look like, refer to the photo the OP included, top left being the end Caps, 2 per side, and the bottom right two peices being the cores. All together look like so:
#7
Rookie
Thread Starter
iTrader: (1)
Join Date: Aug 2012
Location: NC
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Before you try calling out someone, maybe you should pm them before acting like the big bad wolf.
Mike sent me the wrong size orginally 65mm inserts in which he had to resend me 60mm inserts. So i do in fact have both 65 and 60mm inserts in my possession. Buyer can choose which insert they need and i can return the other to mike. Thanks for all your information for interested buyers but i do have both insertss.
Mike sent me the wrong size orginally 65mm inserts in which he had to resend me 60mm inserts. So i do in fact have both 65 and 60mm inserts in my possession. Buyer can choose which insert they need and i can return the other to mike. Thanks for all your information for interested buyers but i do have both insertss.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
bentleymp2
Suspension and Brakes
3
01-08-16 09:28 AM
aarondds
Suspension and Brakes
2
10-06-10 03:47 AM
johnee78
2Gen GS430 / 400/ 300 Classifieds (98-05)
10
05-16-10 07:53 AM
lyonkster
2Gen GS430 / 400/ 300 Classifieds (98-05)
10
04-27-10 09:55 PM