CA Front & Rear RCA (Exact Motorsports)
10-27-13, 02:53 PM
#1
Lead Lap
Thread Starter
iTrader: (25)
Join Date: May 2009
Location: CA
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
Front & Rear RCA (Exact Motorsports)
Selling a set of used Exact Motorsports front and rear RCA "roll center adjustment" ( http://www.exactmotorsports.com/gsrca.html ). $300 picked up in San Diego... $360 shipped
"These front & rear (RCA) lowering blocks' intention are for camber correction, your car has to have coil over suspension and 17" wheels or bigger in order to install these camber correction. The front blocks lower your car by approximately 1 inch, so you have to adjust the coil over suspension higher by 1 inch, rear blocks lower your car by 3/4 inch, so you adjust the rear coil over higher by 3/4 inch, then your car will have less camber."
...RCA's help correct the alignment when you lower a car... and the front RCA is sometimes necessary when installing aftermarket brakes for clearance issues.
"These front & rear (RCA) lowering blocks' intention are for camber correction, your car has to have coil over suspension and 17" wheels or bigger in order to install these camber correction. The front blocks lower your car by approximately 1 inch, so you have to adjust the coil over suspension higher by 1 inch, rear blocks lower your car by 3/4 inch, so you adjust the rear coil over higher by 3/4 inch, then your car will have less camber."
...RCA's help correct the alignment when you lower a car... and the front RCA is sometimes necessary when installing aftermarket brakes for clearance issues.
10-31-13, 09:20 PM
#4
There is some stuff missing, do you have all the hardware? Also, like he said, $60 shipping? Those will fit into a medium flat rate, if not a small. How about $12 for shipping.
10-31-13, 09:30 PM
#5
Driver School Candidate
Join Date: Oct 2013
Location: Ca
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
tats a typo lol... medium flat rate with room to spare...
11-04-13, 10:53 AM
#6
Lead Lap
Thread Starter
iTrader: (25)
Join Date: May 2009
Location: CA
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
Not a typo... I prefer to hook up local peeps with a deal ($300), non-local is $350 +$10 to ship.
GigGs430- I know where the pyramid is, i'm over by the intersection of I-8 and the 163. Shoot me a pm if your interested.
GigGs430- I know where the pyramid is, i'm over by the intersection of I-8 and the 163. Shoot me a pm if your interested.
11-06-13, 10:21 AM
#7
Master Thread Closer!!
iTrader: (33)
Join Date: Jul 2002
Location: Waipahu, Waikele, HI
Posts: 9,859
Likes: 0
Received 9 Likes
on
9 Posts
OP…please clarify for prospective buyers.
Are there any missing parts on the rear RCA kit…do you have all the hardware for it? Its not shown in the pic.
Also, is the front RCA kit 38mm? if so, its more than 1 inch, and you need to run at least 17" wheels to clear the inner wheel barrel.
Pete
Are there any missing parts on the rear RCA kit…do you have all the hardware for it? Its not shown in the pic.
Also, is the front RCA kit 38mm? if so, its more than 1 inch, and you need to run at least 17" wheels to clear the inner wheel barrel.
Pete
Trending Topics
11-14-13, 05:42 PM
#8
Lead Lap
Thread Starter
iTrader: (25)
Join Date: May 2009
Location: CA
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
GSGeezy (aka- BigGS430),
Your private messaging to both accounts isn't working. If you want to provide an email or other point of contact ASAP I'll still deal with you since your local.
Your private messaging to both accounts isn't working. If you want to provide an email or other point of contact ASAP I'll still deal with you since your local.
11-16-13, 04:09 PM
#10
Lead Lap
Thread Starter
iTrader: (25)
Join Date: May 2009
Location: CA
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
I bought the kit used and never installed. The kit is missing the replacement bolts for your stock ones, the guy that sold them to me used the replacement bolts for his install... and when he removed the RCA's he didn't have his stock bolts to put back in.
I've talked to Sandy at EXACT and she said you can get the bolts from any automotive store... I'll be in San Jose (which is where EXACT MOTORSPORTS is located) for Thanksgiving and can pick up the bolts from them directly if you want.? Will probably be $10-15 at the most... here is there info if you want to verify.
Contact Us:
1(408)416-0061
1(408)263-8100
M-F 9:30am to 6pm
Sat: 9:30am to 5pm
Closed Sunday!
Location:
907 HANSON COURT
Milpitas , CA , 95035
If I end up sourcing the 10 bolts from Exact I will be re-listing these for $350 local... and $375 +$10 shipping.
I've talked to Sandy at EXACT and she said you can get the bolts from any automotive store... I'll be in San Jose (which is where EXACT MOTORSPORTS is located) for Thanksgiving and can pick up the bolts from them directly if you want.? Will probably be $10-15 at the most... here is there info if you want to verify.
Contact Us:
1(408)416-0061
1(408)263-8100
M-F 9:30am to 6pm
Sat: 9:30am to 5pm
Closed Sunday!
Location:
907 HANSON COURT
Milpitas , CA , 95035
If I end up sourcing the 10 bolts from Exact I will be re-listing these for $350 local... and $375 +$10 shipping.
11-29-13, 04:24 PM
#11
Lead Lap
Thread Starter
iTrader: (25)
Join Date: May 2009
Location: CA
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
I now have all brand new bolts for the RCA... I got them from Sandy at Exactmotorsports. I will be be home next week and can meet up or ship.
$350 local... and $375 +$10 shipping.
$350 local... and $375 +$10 shipping.
12-30-13, 03:08 PM
#14
Lead Lap
Thread Starter
iTrader: (25)
Join Date: May 2009
Location: CA
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
your car by approximately 1 inch, so you have to adjust the coil over suspension higher by 1 inch, rear blocks lower your car by 3/4 inch, so you adjust the rear coil over higher by 3/4 inch, then your car will
have less camber." -EXACT website