TX 2JZGTE JDM Aristo Swap, Garrett, AEM etc.
06-08-12, 11:36 PM
#1
Lexus Champion
Thread Starter
iTrader: (2)
Join Date: Nov 2006
Location: Tx
Posts: 1,996
Likes: 0
Received 0 Likes
on
0 Posts
2JZGTE JDM Aristo Swap, Garrett, AEM etc.
I hate to see this day, but I am selling my Aristo motor swap.
I was going to do the second round of mods but decided to start on a new project.
With this setup it was dyno'd at 405hp @ 10psi on a mustang dyno. As most of us know this motor is capable of more HP with more supporting mods.
Details:
JDM 2JZGTE Aristo motor swap w/ auto trans
Chrome Garrett GT42R turbo
Chrome valve covers
Chrome alternator housing
Chrome pulleys
Chrome intake manifold w/ dual wastegate
Chrome intercooler piping
Chrome radiator hard pipe
Custom secret service turbo manifold
Custom chrome oil catch cam
Custom purple CF hydro-dipped spark plug cover
Quick release couplers
Greddy coolant catch can
custom 4in down pipe
Transmission oil cooler
FMIC
AEM FIC
TiAl BOV
Tial wastegates (2x)
SARD oil cap
Fluidyne radiator
Mishimotor dual fans
HKS EVC 6 boost controller
Didn't put miles on the swap, less than 1000 miles.
here's a pic of the turbo manifold during the build:
All this for $8k. Would prefer to deal with locals first.
Out of state buyer will be fully responsible for freight costs.
You can PM me here, text or call me @ 832 212 0770
I was going to do the second round of mods but decided to start on a new project.
With this setup it was dyno'd at 405hp @ 10psi on a mustang dyno. As most of us know this motor is capable of more HP with more supporting mods.
Details:
JDM 2JZGTE Aristo motor swap w/ auto trans
Chrome Garrett GT42R turbo
Chrome valve covers
Chrome alternator housing
Chrome pulleys
Chrome intake manifold w/ dual wastegate
Chrome intercooler piping
Chrome radiator hard pipe
Custom secret service turbo manifold
Custom chrome oil catch cam
Custom purple CF hydro-dipped spark plug cover
Quick release couplers
Greddy coolant catch can
custom 4in down pipe
Transmission oil cooler
FMIC
AEM FIC
TiAl BOV
Tial wastegates (2x)
SARD oil cap
Fluidyne radiator
Mishimotor dual fans
HKS EVC 6 boost controller
Didn't put miles on the swap, less than 1000 miles.
here's a pic of the turbo manifold during the build:
All this for $8k. Would prefer to deal with locals first.
Out of state buyer will be fully responsible for freight costs.
You can PM me here, text or call me @ 832 212 0770
Last edited by MrExecutiv; 06-18-12 at 03:01 PM. Reason: Add more info
06-09-12, 09:20 AM
#2
Damn, u really pulling this? It looks so good in the car.
You building another 2J or you getting rid of the car or what?
You running the stock 440's right? This turbo can push whole alot more power with bigger injectors, boost controller, and a tune, this is a great base for some one to make substantially more power from.
Damn I want that plug/timing cover.. Lemme know if you decide to start parting the engine!
You building another 2J or you getting rid of the car or what?
You running the stock 440's right? This turbo can push whole alot more power with bigger injectors, boost controller, and a tune, this is a great base for some one to make substantially more power from.
Damn I want that plug/timing cover.. Lemme know if you decide to start parting the engine!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
CAN-Toronto Gs300 2jzgte swap part out
CHASER4LIF
1Gen GS300 Classifieds (91-97)
12
02-23-10 10:29 AM
James1830
SC400 / 300 Classifieds
2
06-22-06 08:47 AM
