synco357

iTrader: (5)

hello members,
I`m looking for a Igniter for my 1998 GS400. Please see picture, part is circled in Red




If you have a igniter in good working order please contact me:

synco357@aol.com

561 716 2678

Thanks,

Andre

KiPod

iTrader: (31)

The 400 doesn't have that. That is for the 300 only.

synco357

iTrader: (5)

got a CEL light and when i check the codes it said:

IGNITION CONTROL MODULE 1, up to IGNITION CONTROL MODULE 8

3 of my coil are brand new, so the it has to be the igniter. I don`t think the igniter is in the ECU. The dealer gave me the part # and said its 400.00.

Also, the GS300 igniter is near the strut tower, just like the supra

Mr Jokster

iTrader: (8)

If i remember correctly, the ignition control is built in to the coil itself.

synco357

iTrader: (5)

O.K. I have check everything

Coil are good, installed in another gs and the worked fine
check my crank sensor and it read 2.2 ohms
check my cam sensor and it read 1.4 ohms
All new plugs

check my MAF meter and it read lower in ohms (specs) from what it says in the manual

If a MAF meter isn`t working would that cause the car not to have injector pluse and spark?