KY O2 sensor for 2Gen GS
02-01-10, 03:18 PM
#1
Driver
Thread Starter
iTrader: (6)
Join Date: May 2001
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
O2 sensor for 2Gen GS
This is a Walker Oxygen sensor from Oxygensensors.com model # 25024200 which can be viewed here:
http://oxygensensors.com/catalog.php?&pkey=1316113
Bought this as my stock unit somehow cracked, Driver's side pre catalytic converter, to be exact. This is a universal fit, and sells for $52 instead of the ones on the same page up to $89 it is designed to replace. The trick is, it is designed to re - use the harness , includes crimp connectors and insulation heat wrap sleeves to secure the spliced wires (there are 3) the good news is that this unit will fit any of the 4 required O2 sensors in a GS, jsut reuse your harness.
Long story short, I was going to do it myself, then ran out of time and needed car to pass the inspection so I took it to a shop. The mechanic did not want to use my part, something about liability and made me buy a new Denso from him. I got him to remove my harness and I am shipping that with the unit, for $25 shipped to the continental US.
Any questions, let me know, this is spec'd for a 1998 GS400, but use the parts finder at the web link above, # 25024200 may fit other 2GS cars. thanks and pm with any questions.
http://oxygensensors.com/catalog.php?&pkey=1316113
Bought this as my stock unit somehow cracked, Driver's side pre catalytic converter, to be exact. This is a universal fit, and sells for $52 instead of the ones on the same page up to $89 it is designed to replace. The trick is, it is designed to re - use the harness , includes crimp connectors and insulation heat wrap sleeves to secure the spliced wires (there are 3) the good news is that this unit will fit any of the 4 required O2 sensors in a GS, jsut reuse your harness.
Long story short, I was going to do it myself, then ran out of time and needed car to pass the inspection so I took it to a shop. The mechanic did not want to use my part, something about liability and made me buy a new Denso from him. I got him to remove my harness and I am shipping that with the unit, for $25 shipped to the continental US.
Any questions, let me know, this is spec'd for a 1998 GS400, but use the parts finder at the web link above, # 25024200 may fit other 2GS cars. thanks and pm with any questions.
Last edited by KYLEX; 02-02-10 at 01:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post