CAN-Toronto Front lower control radius/caster arms
01-14-10, 03:57 PM
#1
Driver School Candidate
Thread Starter
Join Date: Sep 2003
Location: International
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Front lower control radius/caster arms
Guys/gals - I bought a pair of 2nd gen GS300 lower control arm#2 for my 93 GS300 thinking that they were the same as they appeared identical when I compared the arms. However, they have a different bushing configuration. They looked like new as they are from a post 98 JDM Aristo - all the paint was intact, and bushings looked great, but had hairline cracks. I added urethane to reinforce that bond and they are ready to go. I need to buy new ones that fit, so I'll let these go for $250/pr. You won't likely find a used pair anywhere that don't have beat bushings, or that will send you a pic to determine their condition. I will with mine.
I won't separate them, and you should do both anyway as they wear evenly on both sides.
I won't separate them, and you should do both anyway as they wear evenly on both sides.
Last edited by Adrenaline; 01-15-10 at 02:55 PM. Reason: pic update
01-15-10, 02:55 PM
#2
Driver School Candidate
Thread Starter
Join Date: Sep 2003
Location: International
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
realsync1
GS - 2nd Gen (1998-2005)
13
12-14-22 11:00 AM
