TX F/s- aem standalone w/02+ pnp harness & aem map sensor
08-19-15, 08:11 PM
#1
Driver School Candidate
Thread Starter
F/s- aem standalone w/02+ pnp harness & aem map sensor
SELLER 
AT V
LOCATION:HALTOM TEXAS
PHONE 8A1A7 6A9A0 5A9A9A6 TEXT ONLY
Asking price : $850 shipped with insurance and tracking fedex
F/S- AEM STANDALONE W/02+ PNP HARNESS & AEM MAP SENSOR
this is the V1. I am the second owner of this. Comes with everything shown in the picture. Confirm working between two IS300 with no issue. Selling as is since I am not responsible for any wrong installation by the new owner even though its pnp there are some wires you have to tap in separately like the wideband etc etc. Other than that I can get creditors from other members on here that it works. Only reason for sale is I have lost interest and will be putting funds to other project. This is not my first standalone among all my cars and has been well taken cared of. I am not a tuning expert and all tuning done on this unit was done by a professional. I will include the base map to get the car started. Price is firm.
current tune on this unit:
GTE internals and head gasket, ~8.3:1 compression
GE vvti head with BC 264 cams, BC springs and retainers, 7400rpm redline
Dual 300+lph fuel pumps, 43.5psi base press. 93 octane pump gas
1000cc Bosch EV14 injectors
Factory Coils, HKS DLI, Denso IK22 plugs
Tubular manifold with Turbonetics 6462, .81 A/R, 17psi max
Modded stock throttle body for cable drive
Honda IAC
AEM 3.5 bar MAP
AEM UEGO WB O2 sensor
AEM boost control solenoid
AT VLOCATION:HALTOM TEXAS
PHONE 8A1A7 6A9A0 5A9A9A6 TEXT ONLY
Asking price : $850 shipped with insurance and tracking fedex
F/S- AEM STANDALONE W/02+ PNP HARNESS & AEM MAP SENSOR
this is the V1. I am the second owner of this. Comes with everything shown in the picture. Confirm working between two IS300 with no issue. Selling as is since I am not responsible for any wrong installation by the new owner even though its pnp there are some wires you have to tap in separately like the wideband etc etc. Other than that I can get creditors from other members on here that it works. Only reason for sale is I have lost interest and will be putting funds to other project. This is not my first standalone among all my cars and has been well taken cared of. I am not a tuning expert and all tuning done on this unit was done by a professional. I will include the base map to get the car started. Price is firm.
current tune on this unit:
GTE internals and head gasket, ~8.3:1 compression
GE vvti head with BC 264 cams, BC springs and retainers, 7400rpm redline
Dual 300+lph fuel pumps, 43.5psi base press. 93 octane pump gas
1000cc Bosch EV14 injectors
Factory Coils, HKS DLI, Denso IK22 plugs
Tubular manifold with Turbonetics 6462, .81 A/R, 17psi max
Modded stock throttle body for cable drive
Honda IAC
AEM 3.5 bar MAP
AEM UEGO WB O2 sensor
AEM boost control solenoid
Thread
Thread Starter
Forum
Replies
Last Post
shaodome
SC400 / 300 Classifieds
7
11-09-09 05:57 PM