lkmljp12

Hi, i have the chance to get a second gen gs300 auto transmisison.

My current transmission is failing a bit as it slips.

I can get a 2nd gen A650E in great conditions for super cheap. I've been looking around and can't find if it bolts up to the chassis. I know it will bolt up to the engine.

I know the ECU and TCM will have to be change, and most likely i will have to splice some wires and so on. I have access to all that.

My main concerns is if it will bolt up into the chasis and if the driveshaft will connect to it fine.

Would this be possible at all?? Please let me know!!

Thanks!


[BTW; i've put a 2jz from an SC300 on it. Engine sounds great and runs great!! i want a good transmission now!!!]

Mike_1GO

iTrader: (2)

very interested in this as well. i doubt it will bolt up though. the output shaft and torque converter are different. can anyone else chime in??

Mike_1GO

iTrader: (2)

btw op, you should have this thread moved to the correct section so more members could view it and respond

jdkittle05

you would be better off swapping in a twin turbo tranny. Ive had mine for around six months and its holding on 4 psi of boost. Its direct bolt in just swap over valve body and output flange. I picked mine up locally for $150.