SC 2jzgte block/complete bottom end $300
02-26-11, 06:36 AM
#1
2jzgte block/complete bottom end $300
94 Aristo 2jzgte block and rotating assembly. $300.00
here's the story, this bottom end has been sitting since it started to spin a bearing at a drift event 4 years ago. I shut it down right away and trailered the car home. It has been in a garage ever since covered up. Crank should be fine, new rings and bearings and you will be good to go. Aristo oil pan is not included, but you can have it all for $400.00
Aristo auto trans.. includes tranny cooler. Help 400hp all day long, good clean fluid. $300.00
all located in Myrtle Beach, SC 29588 will pallet and make available for pickup if buyer arranges it.
here's the story, this bottom end has been sitting since it started to spin a bearing at a drift event 4 years ago. I shut it down right away and trailered the car home. It has been in a garage ever since covered up. Crank should be fine, new rings and bearings and you will be good to go. Aristo oil pan is not included, but you can have it all for $400.00
Aristo auto trans.. includes tranny cooler. Help 400hp all day long, good clean fluid. $300.00
all located in Myrtle Beach, SC 29588 will pallet and make available for pickup if buyer arranges it.
Last edited by Epik; 04-07-11 at 08:51 PM.
03-17-11, 11:16 PM
#2
Driver School Candidate
Join Date: Oct 2008
Location: Va
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
How much could I get just the block for, shipped to 23502? I might be able to meet halfway, maybe a little further too. But I don't need internals, already have good ones. : p
Has it been bored? Does it need to be bored? I am using stock gte pistons, so a bored out block would not work.
Has it been bored? Does it need to be bored? I am using stock gte pistons, so a bored out block would not work.
03-26-11, 02:28 PM
#3
How much could I get just the block for, shipped to 23502? I might be able to meet halfway, maybe a little further too. But I don't need internals, already have good ones. : p
Has it been bored? Does it need to be bored? I am using stock gte pistons, so a bored out block would not work.
Has it been bored? Does it need to be bored? I am using stock gte pistons, so a bored out block would not work.
it is a stock 1994 aristo block, bores were never touched. i would prefer not to part it, and i wont sell it for less than what i'm asking which is ridiculously low to begin with.
if you are interested in picking it up, or footing the bill for freight let me know.
also have 2 complete aristo oil pans for sale. $150.00 for each
-12an aluminum oil return fitting on plate to bolt onto aristo pan (or drill and tap to bolt to your GS300 pan) $35.00 shipped
switched out to a supra mid sump pan for my 2jz3 project.
04-07-11, 08:54 PM
#6
check the first post again, i have my complete location/zip for you to get a quote from freight companies. i will strap it to a 1/2 pallet and make it available for any freight company with a liftgate and a pallet jack to pick it up.. pick up at a residence.
Trending Topics
05-03-11, 12:15 PM
#10
Attention anyone that may be interested in this block, or the Aristo GTE auto tranny with cooler that I have up here.
If you are in the Atlanta area or plan to be at Road Atlanta this weekend for Formula Drift, I will be there by Thursday evening. If you want these pieces.. get in touch with my by PM before Thursday morning and I will load them on the trailer.
Payment must be made via PayPal before I leave town, I dont't want to be walking around the vendor area with cash burning a hole in my pocket..LOL
PM me if interested and I'll give you my cell so we can talk.
If you are in the Atlanta area or plan to be at Road Atlanta this weekend for Formula Drift, I will be there by Thursday evening. If you want these pieces.. get in touch with my by PM before Thursday morning and I will load them on the trailer.
Payment must be made via PayPal before I leave town, I dont't want to be walking around the vendor area with cash burning a hole in my pocket..LOL
PM me if interested and I'll give you my cell so we can talk.
Thread
Thread Starter
Forum
Replies
Last Post
DETUNED
2Gen GS430 / 400/ 300 Classifieds (98-05)
4
04-27-06 06:25 AM
