CA FS - LS4 Calipers, Rotors, pads
#1
FS - LS4 Calipers, Rotors, pads
hey,
i have a set of calipers i bought from Aliga (cl member), R1 concept rotors, and pads. All is new, except calipers.
I paid about $400 for everything.
One of the calipers was shaved down, and it made a microscopic hole in the resevoir. I JB welded the little hole. JB weld can withstand constant temperature of 500 degrees Farenheit. But you might want to get it welded bc of the pressure.
Asking price $350 shipped, plus 3.5% paypal fees. OR $325 picked up.
i have a set of calipers i bought from Aliga (cl member), R1 concept rotors, and pads. All is new, except calipers.
I paid about $400 for everything.
One of the calipers was shaved down, and it made a microscopic hole in the resevoir. I JB welded the little hole. JB weld can withstand constant temperature of 500 degrees Farenheit. But you might want to get it welded bc of the pressure.
Asking price $350 shipped, plus 3.5% paypal fees. OR $325 picked up.
Last edited by boostedGS; 03-07-10 at 12:46 PM.
#6
Lexus Champion
I'm not trying to ruin your sale, but if the hole is in the caliper body, it needs to be welded or thrown away. JB is no match for over 1000psi of hydraulic pressure.
#7
Driver
iTrader: (2)
Join Date: Jul 2008
Location: Florida
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
I bought the calipers and had them tig welded, used "them" there because I broke through grinding the other one too. Both welded now, and on the car, waiting on some new pads.
Also, want to vouch for seller, he's an honest guy.
Also, want to vouch for seller, he's an honest guy.
Trending Topics
#8
Lexus Champion
Right on thats good news ! I didnt even realize you got them back in March
Thread
Thread Starter
Forum
Replies
Last Post
cssnms
GX - 1st Gen (2004-2009)
9
10-11-18 07:44 AM
alchemist
GS - 3rd Gen (2006-2011)
30
08-25-14 05:10 AM