Grill emblem
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2001
Location: Phoenix AZ
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
A while ago I replaced the grill in my IS300 with the TRD grill which has the honeycomb insert. I didn't care for the different look between the upper and lower grill inserts, so at least this way they are similar.
The problem I have now is that I can't find a Lexus 'L' emblem to put on the grill. The most obvious solution would be an emblem with threaded studs that would just fit through the honeycomb and I could tighten it from the rear. Unfortunately my dealer parts department says that Lexus has never made such an emblem.
Are there any aftermarket emblem suppliers that might be able to help??? My last resort will be to use an adhesive backed emblem and see how long it lasts - I don't have much hope for that solution though.
Thanks to all.
Terry
The problem I have now is that I can't find a Lexus 'L' emblem to put on the grill. The most obvious solution would be an emblem with threaded studs that would just fit through the honeycomb and I could tighten it from the rear. Unfortunately my dealer parts department says that Lexus has never made such an emblem.
Are there any aftermarket emblem suppliers that might be able to help??? My last resort will be to use an adhesive backed emblem and see how long it lasts - I don't have much hope for that solution though.
Thanks to all.
Terry
#2
Rookie
Join Date: Feb 2001
Location: Southern California
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Go to IS300.net and do a search for a guy named Adrey. He has a white IS w/ the RMM grill and attached a Lexus "L" emblem to the front of his. Not sure how he did it though.
Hope this helps.
Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
chrisCARL0S
IS - 1st Gen (2001-2005)
8
02-03-06 11:22 PM