1QWKGS4

iTrader: (3)

This wheel is one of my favorite designs out there. I can't believe I'm selling these but I decided to go another route. I bought these wheels new and intended it to go on my 2GS and on a future ISF or 3GS.

Wheels are Brand new and still in the Box, only taken out of the box to take pics. I have all hardware (90 degree valve stems, Hub rings, Lugs, and Center caps with allen tools all inside the plastic)

Ideal fitment for 2SC / 3GS or ISF / 2IS. Its alittle too big for my 2GS without fender mod is why I'm deciding to let it go.

Wheels Specs (2 Piece Welded) Wheel Color is Hyper Black
20x9 +42 (64mm Lip = 2.5")
20x10 +42 (90mm Lip = 3.5")

(It will clear BBK)




Included hardware
(4) Piaa 90 Degree Valve stems
(4) Hub Rings
(4) Piaa Carbon Fiber center caps
(20) Lugs

I also bought (2) extra Piaa Carbon Fiber center caps, and (2) extra Piaa 90 degree Valve stems.Always good to have extras just in case)

Xtra accessories included
(2) Piaa Carbon Fiber center caps ($100 Value)
(2) extra Piaa 90 degree Valve stems ($40 Value)

These wheels went for $900 for Fronts and $1000 for the rears. ($3800 for a set)

My price is $2000 Shipped (Continental 48 states) OBO (I will included paypal fees into this price) Buyer does not pay Paypal fees)

Or $1900 Cash Pickup.

Everything Boxed up and Ready to Ship..

1QWKGS4

iTrader: (3)

Pics

Sonic_RC

iTrader: (15)

Just a FYI you DO NOT need to modify your fenders, nor do you need to stretch your tires to make these wheels for a 2GS

1QWKGS4

iTrader: (3)

Thanks for that, and I believe you are correct if I was running within spec tires but I was planning to run 27" Diameter setup which will probably rub in all the wrong places.

Anyways, I'm deciding on a different wheel. Need these gone so I can buy another set..

PDP180180

iTrader: (3)

Out of interest, what would need doing to make these work for the IS-F?

Stunning wheels by the way!

1QWKGS4

iTrader: (3)

Thanks. No work needed, they should fit and have the correct offsets for ISF's. Infact these wheels are ideal for 2IS/ISF and 3GS/2SC.

Sonic_RC

iTrader: (15)

Ya 27" is pretty big and will rub all over the place. Stay within 25-26"

PDP180180

iTrader: (3)

So these wouldn't need me to roll or modify the arches on my IS-F?

Any idea what size tires I would be able to run? Just trying to do the math!

1QWKGS4

iTrader: (3)

You won't have to do anything except mount tires and slap them on. According to Yakuza, It won't be necessary on my GS neither if i run the correct spec tires, I was trying to run bigger tires to offset my low rear-end ratio.

Well since, I was setting these wheels for a future ISF. I have done my research on what I would have ran on them. benefits to you..

255/30-20 Fronts (same as Stock Diameter)
275/30-20 Rears (these are .5" taller than stock, it won't rub since its in the rear)


You can run a slimmer tire but sizes are harder to find in different Brands.

225/35-20 Fronts (.1" taller than Stock Diameter within spec)
265/30-20 Rears (.1-.2" taller than Stock depends on brand tire, closest within spec that will fit 10" width rim)


OR

Hybrid of the two setups..

225/35-20 Fronts (.1" taller)
255/30-20 Rear (Stock Dia) - Note some tire brands say can fit 10" width and some say its 9-9.5" depends on Tire)

Thats my Research results.

PDP180180

iTrader: (3)

Thanks for those. Very useful.

Looks like I'd need around £800 for say a set of Falken's in the hybrid sizes. That's around $1250.

Just need to work out logistics to get them across the pond!

Will be in touch.

Thanks.


Peter

1QWKGS4

iTrader: (3)

I just priced a Sumitomo HTR Z III set for the Hybrid setup for $540 thru the Tire rack..

PDP180180

iTrader: (3)

Nice! That's the joy of living in the UK!

It's expensive!

1QWKGS4

iTrader: (3)

Bump for Lowered Priced $2500 Shipped (Any 48 states) or $2300 Picked-up..

PDP180180

iTrader: (3)

Hey chap. Sorry for the delay, I'm actually in Houston heading back to the UK with a bunch of parts for my ISF!

Good news being I've cleared some space at my buddies house for more stuff! Lol.

Can you do me a huge favour and weigh these for me? Don't need them un-boxed, just trying to work out if I could check them as my luggage on the plane!

Won't be this trip obviously, but I'm over a few times a year for business.

Let me know the packaged weight of one front and one rear please chap.

House scales in the bathroom would be fine I imagine?

Cheers.


Peter

PDP180180

iTrader: (3)

Any luck on those weights yet fella?

Still interested.