CA Rotiform Forged 3 Piece Convex TMB
01-14-14, 08:18 PM
#1
Pole Position
Thread Starter
Rotiform Forged 3 Piece Convex TMB
Looking to sell my current setup. Decided I want to go with 20's. I just spent $4500 on the wheels and about $1200 on the tires. So in total I paid just over $5,700 with a Discount on these rims(Have Receipt to prove this) I'm willing to take a bit of a loss so I can go a different route with my car. Rear tires are 2 months old roughly and have had very little driven miles on them. If you have any questions please ask. I prefer to text and can communicate quicker this way.
Wheels: Custom Made for ISF FITMENT AND TO CLEAR THE BBK
Color: Brushed faces tinted, Polished Inserts, Polished Lips, Black Inner Barrels
Condition: Mint/Barely used NO Damage/ Curbs at all.
Tires: Michelin Pilost Super Sports 255/35/19Front ; 265/35/19 Rear-Just Paid about $1200+ for these
Rim Size: 19x10 front and 19x10.5 rear-Paid a bit over $4500 for these
Fitment: Flush all around. Rear Panels I rolled lightly just to be on safe side and never rubbed. Front only rub slightly in reverse with wheel turned (this can be avoided by shaving the bumper tab, I left mine alone did not bother me). No spacers needed with this setup
Price: Total for all $3900 (Need to sell all together since im going bigger)
Location: So. California
Ask me any questions I take paypal (we could figure out the fee) or cash
Prefer to sell local but will ship
Contact: pm me I'm constantly here, email- arflores82@hotmail.com , phn # 56two-480-37 94
Photos:
Thanks For your time...
Alex
Wheels: Custom Made for ISF FITMENT AND TO CLEAR THE BBK
Color: Brushed faces tinted, Polished Inserts, Polished Lips, Black Inner Barrels
Condition: Mint/Barely used NO Damage/ Curbs at all.
Tires: Michelin Pilost Super Sports 255/35/19Front ; 265/35/19 Rear-Just Paid about $1200+ for these
Rim Size: 19x10 front and 19x10.5 rear-Paid a bit over $4500 for these
Fitment: Flush all around. Rear Panels I rolled lightly just to be on safe side and never rubbed. Front only rub slightly in reverse with wheel turned (this can be avoided by shaving the bumper tab, I left mine alone did not bother me). No spacers needed with this setup
Price: Total for all $3900 (Need to sell all together since im going bigger)
Location: So. California
Ask me any questions I take paypal (we could figure out the fee) or cash
Prefer to sell local but will ship
Contact: pm me I'm constantly here, email- arflores82@hotmail.com , phn # 56two-480-37 94
Photos:
Thanks For your time...
Alex
Last edited by PureDrifter; 01-24-14 at 04:25 AM. Reason: Contact info
01-14-14, 08:23 PM
#2
Pole Position
Thread Starter
Oh Forgot to mention 3.5" Front Lips & 4" Rear Lips measured from the actual Lips used to build the wheels not by measuring with my finger from the front of the barrel 
...Woohoo Party on
Reasons going 20" because I want lower the car a lil bit more and I need the bigger size to get into the garage based of the angel my driveway is..
...Woohoo Party onReasons going 20" because I want lower the car a lil bit more and I need the bigger size to get into the garage based of the angel my driveway is..
Last edited by 1BAD4DR; 01-15-14 at 07:21 PM.
Trending Topics
01-24-14, 04:25 AM
#12
vouch received.
Originally Posted by T-Rex06
Hey man, I'm here to vouch for Alex. I've sold him a lip and he's straight forward.
Here's his thread.
https://www.clublexus.com/forums/whe...onvex-tmb.html
Terrance
Here's his thread.
https://www.clublexus.com/forums/whe...onvex-tmb.html
Terrance