CA work vs kf (4) 5-114.3 18x7.5 +38 all around silver cheap
10-09-13, 06:23 PM
#1
work vs kf (4) 5-114.3 18x8 +38 all around silver cheap
work vs kf 5-114.3 18x8 +38 all around silver. they are in ok condition. 2 wheels powder coat peeling. one lip has corrosion. no bends. these are welded. located in san diego
$1000 pick up
$1150 ship lower 48 states.
$1000 pick up
$1150 ship lower 48 states.
Last edited by antbo; 10-09-13 at 10:03 PM.
10-15-13, 01:52 PM
#4
work wheels are usually welded. i THINK these are the only VS line that are welded. idk why, i didnt do it, it was welded at the factory. if it were my choice, they wouldnt be 
. i know my work euroline DH's were welded also, and i think all the eurolines were, well the later eurolines at least.
oh! i should add that the face isnt sandwiched together with the welded inner and outers. its mounted outsideof the inner and outers. so the face comes off
so if you wanted to relip/rebarrel. you have 2 options:
1. go somewhere to unweld or split the inner and outer barrels/lips
2. remove the face and get a new/used set of inner and outer barrels/lips
. i know my work euroline DH's were welded also, and i think all the eurolines were, well the later eurolines at least.oh! i should add that the face isnt sandwiched together with the welded inner and outers. its mounted outsideof the inner and outers. so the face comes off
so if you wanted to relip/rebarrel. you have 2 options:
1. go somewhere to unweld or split the inner and outer barrels/lips
2. remove the face and get a new/used set of inner and outer barrels/lips
Last edited by antbo; 10-15-13 at 01:57 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ConceptOne
Club Lexus Vendor Marketplace
0
03-19-14 11:08 AM
antbo
Wheels and Tires Classifieds
4
01-21-14 08:08 PM
