mike.gani

Hi guys,

I'm selling my iForged Aeros (with tires) for just $2,100 shipped . I bought it used from a fellow CL member: sickwidit.

Wheels Spec (offset aren't specified) :
20" x 8.5 (~1.7" lip) - Front
20" x 10 (~3.5" lip) - Rear
bolt pattern: 5x114.3

Tire Spec:
Toyo Proxes4: 215/30/20 (95% thread) - Front
Sumitomo HTR ZIII: 275/30/20 (40% thread) - Rear

Mileage on the wheels and tires: approximately 600miles. I don't drive daily with this car.

All wheels are in mint and great condition. All four wheels hold airs and no crack. Always handled carefully and never being under racing track. All four wheels runs smoothly and has no problem at all.

Minor scratches here and there (they are there when I bought it). I replace the barrel on the rear left wheel because of lip damage (yes, it is a brand new wheel now). And the only small lip damage left is on the right front wheel. It was a silly mistake when I park (the curb rash will be shown in the picture).

Wheels and tires are currently located in Fremont, CA - 94539. Local pick up is always welcome.

Wheels and tires are just off the car just today. I've washed and detailed them. I'll be wrap the lip and cover them tomorrow to make sure all wheels are protected and ready to ship right away

I'll accept cash and paypal (my paypal ID: mikegani@yahoo.com).

So, please feel free to contact me if you are interested. I prefer to do the communication via email (just to make it faster).

my email address is mikegani@yahoo.com

Alright, enough the talking.......here are the pics!

On the car:








Off the car:



Right Front:


Left Front:


Right Rear:


Left Rear:




The only curb rash on the left front wheel:



Thank you for looking!

-Michael

mike.gani

Dear Mods, please don't close this thread. I've contacted and still waiting for 'mrsandman' and 'sickwidit' to vouch for me.

Thanks.

passnu2

iTrader: (33)

Ill vouch for Mike

mrsandman

iTrader: (2)

I'll vouch for mike gani, good and honest guy.

lsvtec

iTrader: (7)

are these real 3piece wheels?

bforbrian

iTrader: (3)

Can you have the offsets measured by a wheel shop? With the right tool, it can be accurate to 2mm.

james626

nice wheels!

TWong350

iTrader: (8)

They look nice. But 215 on an 8.5" wheel?

Vroomin350

iTrader: (28)

would this setup fit an IS350 without rubbing?

dmvp29

The IS350 looks cleaner with 19". There are people with 20" and it is do-able, but 19" is bread and butter for the vast majority of IS350 owners.

Up to you, though.

mdgrwl has 20" on his IS350 and did it really well, IMO -

https://www.clublexus.com/forums/is-...ld-thread.html

But, that said, consider 19".

blacksedan

iTrader: (4)

did you have to roll/modify your fenders? I'm also have a 3gs

4DGS

iTrader: (1)

Dude, no wheel shops carry that tool.

bforbrian

iTrader: (3)

Most wheel repair shops should; the first one I went to did and they measured it very accurately.

GangsterGS

will these wheels clear the stock BBK on an 06 gs430? thanks

mike.gani

thanks passnu2 n mrsandman for the vouch!