NY FS: 19" Rare Rays G-Games 99b + Vredestein tires
12-23-10, 03:27 PM
#1
Driver
Thread Starter
Join Date: Jun 2007
Location: New York
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
FS: 19" Rare Rays G-Games 99b + Vredestein tires
Up for sale is Rays G-Games 99B. MINT CONDITION!
Discontinued. Staggered setup.
1 inch lip all around with a very nice concave face!
BBK friendly!
$1750 OBO
Front: 19x8.5/ Offset + 25 /Hole 5x114.3
Color: Gunmetal
Rear: 19x9.5/ Offset + 22 /Hole 5x114.3
Color: Gunmetal
- 1 Piece Construction
- Lightweight ~19 pounds front ~22 pounds rear (lighter than some CCW's!)
- Limited Edition, no longer produced
- Wheels new were ~ $3,000+
- Tires new were ~ $1000+
Front Tires:
245/35/19 Vredestein Ultrac Sessanta. One of the front tires has a hole in it. It is beyond repair. It is on the inner sidewall. Both have about 85% thread left.
Rear Tires:
275/35/19 Vredestein Ultrac Sessanta. Perfect Condition , both have about 75% thread left.
Rays Center Cap are included. One of the center cap is scratched up a little bit.
These wheels are made by the RAYS Cast Flow Forming technology. This revolutionary new technology is licensed to very few wheel manufacturers. This process allows very high quality wheels to be made, much better than many cheap brands which are made using poor quality gravity casting.
This specialized process begins with a low pressure type of casting and uses a special machine that spins the initial casting, heats the outer portion of the casting and then uses steel rollers pressed against the rim area to pull the rim to its final width and shape. The combination of the heat, pressure and spinning create a rim with high strength and durability. This method has been used to make wheels for both Formula 1 and Indy cars.
MORE PIC: http://img574.imageshack.us/gal.php?g=dsc0457hf.jpg
aliga, licelsior can vouch for me.
Discontinued. Staggered setup.
1 inch lip all around with a very nice concave face!
BBK friendly!
$1750 OBO
Front: 19x8.5/ Offset + 25 /Hole 5x114.3
Color: Gunmetal
Rear: 19x9.5/ Offset + 22 /Hole 5x114.3
Color: Gunmetal
- 1 Piece Construction
- Lightweight ~19 pounds front ~22 pounds rear (lighter than some CCW's!)
- Limited Edition, no longer produced
- Wheels new were ~ $3,000+
- Tires new were ~ $1000+
Front Tires:
245/35/19 Vredestein Ultrac Sessanta. One of the front tires has a hole in it. It is beyond repair. It is on the inner sidewall. Both have about 85% thread left.
Rear Tires:
275/35/19 Vredestein Ultrac Sessanta. Perfect Condition , both have about 75% thread left.
Rays Center Cap are included. One of the center cap is scratched up a little bit.
These wheels are made by the RAYS Cast Flow Forming technology. This revolutionary new technology is licensed to very few wheel manufacturers. This process allows very high quality wheels to be made, much better than many cheap brands which are made using poor quality gravity casting.
This specialized process begins with a low pressure type of casting and uses a special machine that spins the initial casting, heats the outer portion of the casting and then uses steel rollers pressed against the rim area to pull the rim to its final width and shape. The combination of the heat, pressure and spinning create a rim with high strength and durability. This method has been used to make wheels for both Formula 1 and Indy cars.
MORE PIC: http://img574.imageshack.us/gal.php?g=dsc0457hf.jpg
aliga, licelsior can vouch for me.
Last edited by SC904; 03-29-11 at 10:14 AM. Reason: Price Drop.
12-23-10, 04:51 PM
#4
Driver
Thread Starter
Join Date: Jun 2007
Location: New York
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
